4x114.3 itr setup on 97 hatch. HELP!!!
#1
Junior Member
Thread Starter
Join Date: Nov 2009
Location: in my sleep
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
4x114.3 itr setup on 97 hatch. HELP!!!
okay, so i bought a 97 civic hatch and i want to do the 4x114.3 wheel conversion. i already have the setup off the 96 integra type r from japan.
it comes with both front knuckles with rotors, pads, and calipers. for the rear, it comes with rotors, pads, calipers, and the ebrake cables. i know the rear will fit perfect because i did this for another already.
so i did the front driver side the other day and it doesnt seem to fit right. the knuckle hits the springs when installing but after i put the wheels on and drop it, it has doesnt touch anymore. and after i drop the car, the wheels camber super bad and my car is stock height.
HELP PLEEEEEEEAASE???
it comes with both front knuckles with rotors, pads, and calipers. for the rear, it comes with rotors, pads, calipers, and the ebrake cables. i know the rear will fit perfect because i did this for another already.
so i did the front driver side the other day and it doesnt seem to fit right. the knuckle hits the springs when installing but after i put the wheels on and drop it, it has doesnt touch anymore. and after i drop the car, the wheels camber super bad and my car is stock height.
HELP PLEEEEEEEAASE???
#2
Junior Member
Thread Starter
Join Date: Nov 2009
Location: in my sleep
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Re: 4x114.3 itr setup on 97 hatch. HELP!!!
please help!!! AIM me please. i wont be on till later tonight. sn: fresheRthanMINT
thanks. any info will help.
thanks. any info will help.
Last edited by SiR_ej6; 12-02-2009 at 01:01 PM. Reason: mispelled a word
Thread
Thread Starter
Forum
Replies
Last Post