4.7 ITR Final Drive install Question
#1
Honda-Tech Member
Thread Starter
Join Date: May 2006
Location: Spokane, Wa, USA
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
4.7 ITR Final Drive install Question
ive been working on installing my 4.7 itr final drive in my B16 and i had a question
when i was reassembling the countershaft it was a pain to touqe the nut down and when it was at the proper 79.6ft lbs the nut hung off the countershaft about 1/8in so i decied to go one more turn big mistake because the brass collar that sits ontop of first gear mushroomed over first gear. so my question is can that nut hang off the countershat and be ok??
when i was reassembling the countershaft it was a pain to touqe the nut down and when it was at the proper 79.6ft lbs the nut hung off the countershaft about 1/8in so i decied to go one more turn big mistake because the brass collar that sits ontop of first gear mushroomed over first gear. so my question is can that nut hang off the countershat and be ok??
Thread
Thread Starter
Forum
Replies
Last Post
s2kkid
Acura Integra
4
09-27-2004 12:58 PM