22mm ITR rear sway bar and ASR brace install with Apex'i WS2 issue on EG
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2006
Location: Union City, CA, US
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
22mm ITR rear sway bar and ASR brace install with Apex'i WS2 issue on EG
Has anyone ever had any issues regarding installation issues of the rear sway with the Apex'i WS2?
I had my rear sway installed at CarLabs in Santa Clara and they said that the WS canister gave the rear sway no clearance so they suggested me to go have my axel back extended 2-3 inches to have clearance for my 22mm sway.
Any one have the same issues?
The WS2 was really tight fit to begin with so the exhaust tip was behind the bumper by half an inch. now after modification and extension it sticks out 2 inches from the rear bumper.
Just an FYI for future ppl who have this setup.
I had my rear sway installed at CarLabs in Santa Clara and they said that the WS canister gave the rear sway no clearance so they suggested me to go have my axel back extended 2-3 inches to have clearance for my 22mm sway.
Any one have the same issues?
The WS2 was really tight fit to begin with so the exhaust tip was behind the bumper by half an inch. now after modification and extension it sticks out 2 inches from the rear bumper.
Just an FYI for future ppl who have this setup.
Thread
Thread Starter
Forum
Replies
Last Post
Jade-Giant
Suspension & Brakes
2
03-18-2007 03:30 AM