drvfast

i have rear disk brakes that i got of an gs-r. now i'm trying to turn the pistion back in so the new brake pads will fit no luck. i'm using needle nose pliers and it wont budge. i even opened the bleeder screw to see if that will help the pision sink in that didn't work. is there a tool that can get this pistion to turn or is something wrong with the piston it self?

also do u guys know the name of the web site that shows u how to install an gs-r cluster in a eg thanks

DelSol808

use a C clamp

PSU

iTrader: (2)

use the search, button, go to archives, then type in gsr cluster, and pick the civic/sol forum

you'll get like 20 hits

Pho Real

tool at autozone or pepboys or some shithole like that 8.99 universal for every car goes onto a 1/4" rachet extension .... cant use a c clamp on the rear

DelSol808

ohh my bad i thought that was front.....

delScho

Yup, gotta twist them in on the rears...

racecarpete

yeah there is a tool you can buy or you can use a big screw driver or a small flat crowbar does the trick for me. Good luck

drvfast

thanks guys