jaycapz

Simple question here about intake installation. I made a simple ram air intake, now. There is supposed to be two hoses in and out right? One that runs back to the crank case, and another one that goes.... for the temp sensor?

I wanna make sure this pipe fits the stock '00 lx, before I go nuts and have to break out the drillin tools and spend a day on this.

Click below for the pics:
http://hometown.aol.com/jaycapz/pics.htm
Thanks.


Modified by jaycapz at 2:54 AM 10/13/2004

civic-4-ges

There should be a hole and grommet for your IAT sensor
There should be a hose nipple that goes to your valvecover

jaycapz

alright, kewl. Then its done. Does anyone know on a '00 civic lx what I will need to install it. Seems like ill only need maybe a bracket or 2 to stabilize and hold it in there. Necessary to take out the 2nd intake piece? Would it be good to use as a rest for the cone-head?

Any suggestions before I hit up home depot? =]

TimEG_2

they got those brackets at gas stations... at least aroudn her they do.

civictildeath

i got cold air and the brackets they sent me suct so i used a zip tie and hooked it to my strut brace it works