hondateen17

I have a 00 civic ex. i have a short ram intake, header, 2.5 catback exhaust, advanced timing and yes i am running 93 octane, msd ignition, bosch plat spark plugs, and an air breather. what else should i do besides an engine swap and turbo? is a high flow cat good? what about a bigger throttle body and intake manifold?

my_slow_civic

Sell your msd, and get rid of those plugs.

DaddieDA

You should take your ECU somewhere to get chipped. That should do you some justice.

cambopheonix56

yea msd wont do anything, but yea a high flow cat will give you a few ponies, and remember if you get a bigger throttle body, dont go too big or you will lose power.

Mugen112

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by my_slow_civic &raquo;</TD></TR><TR><TD CLASS="quote">Sell your msd, and get rid of those plugs.</TD></TR></TABLE>

whats wrong with his plugs?

Turbo_y8

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mugen112 &raquo;</TD></TR><TR><TD CLASS="quote">

whats wrong with his plugs?</TD></TR></TABLE>
your on a need to know basis

sicones

a bigger throttle body and a high flow cat on a stock d series, say good bye to the last bit of low end torque you have

btw a msd ignition is nice to have, smoother idle and better gas milage