*PiX* Car work, and stuff keeping me up at night *PiX* 56k go home
#1
Honda-Tech Member
Thread Starter
Join Date: May 2001
Posts: 894
Likes: 0
Received 0 Likes
on
0 Posts
*PiX* Car work, and stuff keeping me up at night *PiX* 56k go home
Alrighty. Stuff that I'm working on and putting in soon.
I'm calling this stuff Phase one of hatch make over.
This is how much of a bitch trailing arms are. I've been drilling, cutting, grinding the rubber away.
End result you need to get that trailing arm bushing at to get the polyurethane in.
That's the polyurethane insert, and the metal sleeve that's gotta go into the insert, after I got all the rubber off.
My new engine mounts. HASport billet aluminum mounts. The rear is their drag mount. Bling level is at an all time high.
The rear drag mount, notice the bling.
New light weight front stabilizer mount. Waiting on new bushings for it, and the passenger side.
Extra short block. Building it up after paint, but I'll start taking it apart.
Hmmmm what kinda motor is it???? Oh yeah motor and engine stand were free from my friend.
New Skunk2 intake manifold, with the Ericks Racing 70mm tapered to 68mm throttle body.
Port matched the manifold to the throttle body. Cost? $20 Makers mark bottle.
New steering wheel. Momo racing. Using a momo hub, and Tekniq auto quick release hub also for extra safety.
Carbonfiber dash. Still deciding if I wanna install it or not.
S2000 seats for the comfy ride. Lovin' 'em.
Civic framing is on. Ready to be bolted in. I can't wait. These seats are so comfy.
More stuff is already lined up. Hopefully soon I'll be dismantling the car to get it ready for paint.
[Modified by Bumnah, 2:13 AM 3/13/2003]
I'm calling this stuff Phase one of hatch make over.
This is how much of a bitch trailing arms are. I've been drilling, cutting, grinding the rubber away.
End result you need to get that trailing arm bushing at to get the polyurethane in.
That's the polyurethane insert, and the metal sleeve that's gotta go into the insert, after I got all the rubber off.
My new engine mounts. HASport billet aluminum mounts. The rear is their drag mount. Bling level is at an all time high.
The rear drag mount, notice the bling.
New light weight front stabilizer mount. Waiting on new bushings for it, and the passenger side.
Extra short block. Building it up after paint, but I'll start taking it apart.
Hmmmm what kinda motor is it???? Oh yeah motor and engine stand were free from my friend.
New Skunk2 intake manifold, with the Ericks Racing 70mm tapered to 68mm throttle body.
Port matched the manifold to the throttle body. Cost? $20 Makers mark bottle.
New steering wheel. Momo racing. Using a momo hub, and Tekniq auto quick release hub also for extra safety.
Carbonfiber dash. Still deciding if I wanna install it or not.
S2000 seats for the comfy ride. Lovin' 'em.
Civic framing is on. Ready to be bolted in. I can't wait. These seats are so comfy.
More stuff is already lined up. Hopefully soon I'll be dismantling the car to get it ready for paint.
[Modified by Bumnah, 2:13 AM 3/13/2003]
#3
Honda-Tech Member
Re: *PiX* Car work, and stuff keeping me up at night *PiX* 56k go home (Bumnah)
Phase1 is coming along great, now get to work and put everything in. im iffy about the c/f dash though. i say sell it for more then u got it for nice stuff, the hasport mounts are blingin'
#6
Former Moderator
Re: *PiX* Car work, and stuff keeping me up at night *PiX* 56k go home (Bumnah)
Got any pics of the car itself?
What's the plans for the motor, and what motor are you building?
Everything looks good thus far, keep us posted y0!
What's the plans for the motor, and what motor are you building?
Everything looks good thus far, keep us posted y0!
Trending Topics
#14
Honda-Tech Member
iTrader: (1)
Join Date: May 2002
Location: PA
Posts: 1,561
Likes: 0
Received 0 Likes
on
0 Posts
Re: *PiX* Car work, and stuff keeping me up at night *PiX* 56k go home (Bumnah)
How much of a bitch trailing arms are. I've been drilling, cutting, grinding the rubber away.
End result you need to get that trailing arm bushing at to get the polyurethane in.
#18
Re: *PiX* Car work, and stuff keeping me up at night *PiX* 56k go home (panda power)
Can I see some more pics of the dash? I might be interested in buying it from you.
#19
Honda-Tech Member
Thread Starter
Join Date: May 2001
Posts: 894
Likes: 0
Received 0 Likes
on
0 Posts
Re: *PiX* Car work, and stuff keeping me up at night *PiX* 56k go home (Bumnah)
Looks good Amrit! Camber kit is installed and I'm lovin it. Thanks! Good luck with the work.
Phase1 is coming along great, now get to work and put everything in. im iffy about the c/f dash though. i say sell it for more then u got it for nice stuff, the hasport mounts are blingin'
wicked TB and Seat goodness
nice pics
nice pics
lookin good Bum
Got any pics of the car itself?
What's the plans for the motor, and what motor are you building?
Everything looks good thus far, keep us posted y0!
What's the plans for the motor, and what motor are you building?
Everything looks good thus far, keep us posted y0!
The b16a2 short block will be built for boost.
i can vouch for those seats they are cumfy as hell ... how much you get your set for?
Damn, I just used my torch on those bushings. Melting the rubber is much easier!
Can I see some more pics of the dash? I might be interested in buying it from you.
This is the only other recent picture I have. I"m not tryin' to sell it too hard. But if the price is right I'll sell.
#20
Honda-Tech Member
Join Date: Sep 2001
Location: socal, ca, US
Posts: 6,067
Likes: 0
Received 0 Likes
on
0 Posts
Re: *PiX* Car work, and stuff keeping me up at night *PiX* 56k go home (Bumnah)
Alrighty. Stuff that I'm working on and putting in soon.
I'm calling this stuff Phase one of hatch make over.
[Modified by Bumnah, 6:02 PM 3/12/2003]
[Modified by Bumnah, 6:15 PM 3/12/2003]
I'm calling this stuff Phase one of hatch make over.
[Modified by Bumnah, 6:02 PM 3/12/2003]
[Modified by Bumnah, 6:15 PM 3/12/2003]
#22
Honda-Tech Member
Thread Starter
Join Date: May 2001
Posts: 894
Likes: 0
Received 0 Likes
on
0 Posts
Re: *PiX* Car work, and stuff keeping me up at night *PiX* 56k go home (navin)
Sorry.
Server with pix went down. Moved 'em to a new server. Lost some pix from the album in the process. I think only one picture in the thread is affected. Either way.
Um motor came out of my friend's si. He wrecked it and sold what he could. Short block left over. Gave it to me along with an engine stand can't beat that.
Server with pix went down. Moved 'em to a new server. Lost some pix from the album in the process. I think only one picture in the thread is affected. Either way.
Um motor came out of my friend's si. He wrecked it and sold what he could. Short block left over. Gave it to me along with an engine stand can't beat that.
#23
Honda-Tech Member
Join Date: Sep 2001
Location: socal, ca, US
Posts: 6,067
Likes: 0
Received 0 Likes
on
0 Posts
Re: *PiX* Car work, and stuff keeping me up at night *PiX* 56k go home (Bumnah)
Sorry.
Server with pix went down. Moved 'em to a new server. Lost some pix from the album in the process. I think only one picture in the thread is affected. Either way.
Um motor came out of my friend's si. He wrecked it and sold what he could. Short block left over. Gave it to me along with an engine stand can't beat that.
Server with pix went down. Moved 'em to a new server. Lost some pix from the album in the process. I think only one picture in the thread is affected. Either way.
Um motor came out of my friend's si. He wrecked it and sold what he could. Short block left over. Gave it to me along with an engine stand can't beat that.
#24
Honda-Tech Member
Thread Starter
Join Date: May 2001
Posts: 894
Likes: 0
Received 0 Likes
on
0 Posts
Re: *PiX* Car work, and stuff keeping me up at night *PiX* 56k go home (acydphryck)
Um yeah...
it's called a photo album.... that means i have pictures that I didn't post in the thread. that means more than you see.
feel free to check out my album
http://www.bumnah.com/~marvin/bumnah
[Modified by Bumnah, 2:01 AM 3/13/2003]
it's called a photo album.... that means i have pictures that I didn't post in the thread. that means more than you see.
feel free to check out my album
http://www.bumnah.com/~marvin/bumnah
[Modified by Bumnah, 2:01 AM 3/13/2003]
#25
Honda-Tech Member
Join Date: Feb 2000
Location: Spokane, Warshington
Posts: 1,465
Likes: 0
Received 0 Likes
on
0 Posts
Re: *PiX* Car work, and stuff keeping me up at night *PiX* 56k go home (Bumnah)
Hey Bumnah, I was just thinking to myself the other night. "I wonder what the hell ever happened to Bumnah?" Last I saw you had put new door skins on the hatch. looks like your still working hard on it.