AlphaQup

I'm just curious in who has tried this method of getting rid of door dings? Either you did it yourself or had a shop do this, let me know on the outcome. If also anybody in the bay area (CA) knows of a good shop to do this, some info would be greatly appreciated.
Thanks,
Nick

Tad

it all depends on the severity of the ding.

if it was bad enuf to stretch the metal, then they cant get it back 100%, maybe like 70% or so.

i had some done, by some guy, he is a mobile pdr guy, he came out and poped out small dent on my fender, it was like it was never there.

but he tried getting some more major dents out on my door and could only get them out like 70-80%, you can see the ripple in the reflection, but you cant really feel it if you run your hand over it.

cost me 200bux.. but I could tell I coulda haggled him down.. I just didnt cuz i'm no good at that ****!! haha, doh!

built562

it is the sh*t, it works great on dings and most dents, but it does not work on parts with bondo and it only works if the area is accesable from the rear. such as the door dings they can remove the door panel. if the guy does it right it looks perfect. if anyone in los angeles area/orange county area need paintless dent removal i have a great guy that does it and i highly recomoned him.

in short its good if the guy knows what hes doing

B2FiNiTY

iTrader: (2)

Paintless dent removal is GREAT

D16Z6

DING KING LOL

u0f

it sucked for me. maybe its just because i have a black car but i can tell where my door dings were...

Ricey McRicerton

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by D16Z6 &raquo;</TD></TR><TR><TD CLASS="quote">DING KING LOL</TD></TR></TABLE>
Way to use those 5 posts a day wisely. I swear.

dwnthehatch

iTrader: (1)

I had it done to my black 00 hatch. You could never tell there were dents there. I paid about $240 to get all the dings out of the car. I went to Dent Wizard.

FuZioNxMaxBoost

Dent Wizard is good, my friend that works at BMW says they call Dent Wizard to do work.

HXMan

I had PDR done to my old civic that was involved in a 1 in 100 year hailstorm. It was really bad, a few blocks from me had one foot of hail on the ground, and alot of it was the size of golf *****....

...you can imagine what my car looked like.

Anyway, I had some pro dent removers take care of the dents. There whole job was to go to places where there were severe hail storms.

In about an hour my car looked better then before...they took out any door dings that I had too.

I got the hookup price too....$600

AlphaQup

OK now that PDR is highly recommended. Anybody live in the CA bay area know of any one who does this? $200-$300 range for removing dents is better than getting a $300 dollar half *** paint job imo.

EricUSC

I took my car to Dent Wizard in Torrance, CA 3 years ago and they did an excellent job of removing the dings. I have since accumulated more door dings and will be going back. Dent Wizard locations are everywhere, including the Bay Area. Check their website:

http://dentwiz.com/usaindex.html

to learn more about paintless dent removal and to find a Dent Wizard location near you.

AlphaQup

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EricUSC &raquo;</TD></TR><TR><TD CLASS="quote">I took my car to Dent Wizard in Torrance, CA 3 years ago and they did an excellent job of removing the dings. I have since accumulated more door dings and will be going back. Dent Wizard locations are everywhere, including the Bay Area. Check their website:

http://dentwiz.com/usaindex.html

to learn more about paintless dent removal and to find a Dent Wizard location near you.</TD></TR></TABLE>
thanks for the link bro. any more experiences and recomendations from the bay?

Del Sol SiR

iTrader: (2)

I had "Dent Time" do the repair at a car show recently, in San Diego, Ca. They removed a bunch of dents for under a 100 bucks on my black Del Sol. Turned out really great !

http://www.denttime.com
"tell them that the black del sol from importfest san diego refferred you, maybe you'll get a discount"


Modified by DelSolSiR at 10:07 AM 10/31/2003

FuZioNxMaxBoost

Check to see if there is a dent wizard in your area. They usually charge a flat rate per panel. So if you have 2 or 20 dents in a panel, same price.

rodrez.

[QUOTE=DelSolSiR]I had "Dent Time" do the repair at a car show recently, in San Diego, Ca. They removed a bunch of dents for under a 100 bucks on my black Del Sol. Turned out really great !

http://www.denttime.com
"tell them that the black del sol from importfest san diego refferred you, maybe you'll get a discount"
QUOTE]

It looks really good, you can't even tell. Big *** crowd of people around his car while he did it too, haha

AlphaQup

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DelSolSiR &raquo;</TD></TR><TR><TD CLASS="quote">I had "Dent Time" do the repair at a car show recently, in San Diego, Ca. They removed a bunch of dents for under a 100 bucks on my black Del Sol. Turned out really great !
</TD></TR></TABLE>
Their website dont say much, or anything at all about their company. Do they operate all throught Cali? Any more experiences? Bay area people?

Del Sol SiR

iTrader: (2)

Don't know. I think there is contact info on their site, isn't there ? I didn't see a number for the Bay area, maybe they can recommend if you contact them.
Here, let me copy their contact info from their website for you to this post.

San Diego
North County
Temecula
(800) 420-DENT

Riverside
(909) 522-4513

gotdings@DentTime.com

underpressure02

I used a paintless dent remover guy local to me here in PA. My car got killed with dents when a hail storm came through and I was at work. I had over 100 dents on on the hood, roof and trunk. I took it to this guy in the morning thinking it would take him almost all day to do. 2 hours later he called and is like all done. I was like yeah right he had to miss some. Sure enough I go and pick up the car and every dent is gone. The guy did a great job. HE was showing me the tools he uses. Most of them are just thin metal rods that he bends to get into where the dents are. I think the job will depend on how good the guy doing it is. Hope that helps

LoSt is BlaCk

it really works!! i was very happy with my car after they did mine!

TurboBumblBee

it works great.. depending on the dent, but they can always make it look better then original..

if anyone in the NOVA area needs some dents taken out PM and ill talk to a really good friend of mine that works for dentmasters and works on all the nice dealerships like hbl, mercedes, and bmw.. i know he does side jobs cause its easy for him and he makes money doin it..

piggs

Does any 1 know how dent removal is done?and what tools look like?
thinking of trying it

TomC

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by piggs &raquo;</TD></TR><TR><TD CLASS="quote">Does any 1 know how dent removal is done?and what tools look like? thinking of trying it </TD></TR></TABLE>

This would not be a good idea , The guys have to goto School for like 1-2yrs and like %40 of them dont even cut it ... Its not an EZ task , Its harder than just doing body work imo. Just pay someone

piggs

I understand that its not that EZ but i am willing to try it. I m consider myself to be meticulous and very handy craftsman
If anyone has any info or trick of the trade please share it with us.
And also different type of tools that are available

thank you

Powered by Honda

I wish I had before and after photos, but I tried a PDR service and the results were excellent. I had a big dent on my passenger side fender from some dude who accidentally rammed a table end into while moving. Looked horrible. PDR guy came by and fixed in 20 minutes.