*** EG's PERFECT EXHAUST???
#1
Junior Member
Thread Starter
Join Date: Feb 2006
Location: Jacksonville, FL, USA
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
*** EG's PERFECT EXHAUST???
i just wanted to know a nice and deep toned exhaust for an EG. i like the N1 but want other suggestions and if u have any pictures post some up! N1 and the WS2 are pretty nice.. but lmk. thank you
#2
Join Date: May 2003
Location: on a plane fighting terrorists
Posts: 425
Likes: 0
Received 0 Likes
on
0 Posts
Re: *** EG's PERFECT EXHAUST??? (gsrhatchinblack)
I have a buddyclub pro spec with a 2.5" test pipe. It sounds really deep and is almost silent at low rpms. I have a b series swap FYI.
I don't think there is one perfect exhaust though.
I don't think there is one perfect exhaust though.
#3
Member
Join Date: Feb 2004
Location: Oklahoma City, OK, USA
Posts: 1,459
Likes: 0
Received 0 Likes
on
0 Posts
Re: *** EG's PERFECT EXHAUST??? (gsrhatchinblack)
if you dont care about a name-brand, then i would say kteller mandrel bent piping, a long resonator, or two, a cat, and a straight through muffler, like the WS2.
resonators make all the difference
resonators make all the difference
#4
Junior Member
Thread Starter
Join Date: Feb 2006
Location: Jacksonville, FL, USA
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
well not perfect exhaust.. but one that is just right in tone and style.. but i know its up to the car owners likes.
is your exhaust an axleback? and how much was it? i have a b series as well.
is your exhaust an axleback? and how much was it? i have a b series as well.
#5
Junior Member
Thread Starter
Join Date: Feb 2006
Location: Jacksonville, FL, USA
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
the ws2 is getting to me.. but i also like the N1 just bc of looks. i can get a decent deal on it. anyone have pics of a EG with the WS2?
#6
Member
Join Date: Feb 2004
Location: Oklahoma City, OK, USA
Posts: 1,459
Likes: 0
Received 0 Likes
on
0 Posts
Re: (gsrhatchinblack)
a nice axle back is going to cost a lot. Like around $500. And alot of what you are buying is a name. Sure it is good quality, but your paying for a name. A kteller exhaust is pretty cheap, dont remember how much, but then you just add what you want.
Trending Topics
#10
Junior Member
Join Date: Nov 2005
Location: Buckley, WA, usa
Posts: 429
Likes: 0
Received 0 Likes
on
0 Posts
i have dc sports 4-1 header with 2.25 piping to a skunk 2 muffler...sounds hella good imo...if my car wasnt torn apart id give ya a sound clip but its one of my fav sounds hondas
#12
Re: *** EG's PERFECT EXHAUST??? (gsrhatchinblack)
i have a 4-2-1 header, stock cat, 2.25 pipes, resonator and a magnaflow muffler. was pretty deep and not too loud. but i have since cut out the resonator for clearance reasons.
#20
Honda-Tech Member
Join Date: May 2004
Location: Dallas, TX, usa
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
Re: (hatch-E-vanish)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hatch-E-vanish »</TD></TR><TR><TD CLASS="quote">i have 2.5 piping with a 2.5 test tube and a s2000 axle back it sounds like a g35 (really nice humming sound)</TD></TR></TABLE>
niice. any sound clips???
niice. any sound clips???
#21
Honda-Tech Member
Re: (sol2hatch)
Has there ever been an open poll that didn't quickly degenerate into a poll about the original poster's sexual preferences?
When my OEM wore out a couple years back I just replaced it with new OEM pieces. The B16A3 is high strung as it is, I was afraid of making a bad situation worse.
So all I hear when driving around is what comes out the cold air intake. And I'd hate to have the atypical fartcan exhaust note competing with that bass/baritone...
When my OEM wore out a couple years back I just replaced it with new OEM pieces. The B16A3 is high strung as it is, I was afraid of making a bad situation worse.
So all I hear when driving around is what comes out the cold air intake. And I'd hate to have the atypical fartcan exhaust note competing with that bass/baritone...
#22
Member
Join Date: Feb 2004
Location: Oklahoma City, OK, USA
Posts: 1,459
Likes: 0
Received 0 Likes
on
0 Posts
Re: (MonkeyBoy668)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MonkeyBoy668 »</TD></TR><TR><TD CLASS="quote">Has there ever been an open poll that didn't quickly degenerate into a poll about the original poster's sexual preferences?
When my OEM wore out a couple years back I just replaced it with new OEM pieces. The B16A3 is high strung as it is, I was afraid of making a bad situation worse.
So all I hear when driving around is what comes out the cold air intake. And I'd hate to have the atypical fartcan exhaust note competing with that bass/baritone...</TD></TR></TABLE>
LOL, your probably right, but dont alot of post end up that way anyway? And as much as i like OEM, my OEM exhaust was about the size of a peashooter (CX Hatch), and if you get the right exhaust, it doesnt sound bad, or loud. I personally have an OEM RSX type S muffler on 2.5 piping, high flow cat, and 24" resonator, it is nice, not loud, still sporty sounding. I like it, but will probably get a WS2 or something else because i cant fit my sway bar with that muffler
When my OEM wore out a couple years back I just replaced it with new OEM pieces. The B16A3 is high strung as it is, I was afraid of making a bad situation worse.
So all I hear when driving around is what comes out the cold air intake. And I'd hate to have the atypical fartcan exhaust note competing with that bass/baritone...</TD></TR></TABLE>
LOL, your probably right, but dont alot of post end up that way anyway? And as much as i like OEM, my OEM exhaust was about the size of a peashooter (CX Hatch), and if you get the right exhaust, it doesnt sound bad, or loud. I personally have an OEM RSX type S muffler on 2.5 piping, high flow cat, and 24" resonator, it is nice, not loud, still sporty sounding. I like it, but will probably get a WS2 or something else because i cant fit my sway bar with that muffler
#24
Honda-Tech Member
Re: (Hater-Trend)
i have the hks hi power on my b16 with a 4-1 kamikaze 2 1/2" header and 2 1/2 high flow cat it sounds really good not really high pitched and low hum when your driving normal