SCANGAUGE 2 CUSTOM INSTALL
09-23-2008, 03:27 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2008
Location: PA
Posts: 745
Likes: 0
Received 0 Likes
on
0 Posts
SCANGAUGE 2 CUSTOM INSTALL
Hey guys, ive been using this site and others like it to get ideas and advice on my car for a short while now.
Ive recently bought a scangauge 2 and have been trying to think of a cool way to mount it other than what everyone else has already done. So here it is.... still in the works though but its a start. I used an extra steering column cover and fiber glassed a mount for the gauge using 1/8 in Plexiglas as a frame and some felt from walmart. Tomorrow I'm gonna Bondo it and give it a final sand before painting it black to match the interior.
Let me know what you guys think.
PS. i really like the scangauge, its quite useful and Ive been getting 43 MPG around town driving up and down through the Appalachians, and Ive been monitoring intake air temp and recently wrapped my exhaust manny with header wrap and have seen a significant improvement in IAT and MPG...try it before you knock it
Ive recently bought a scangauge 2 and have been trying to think of a cool way to mount it other than what everyone else has already done. So here it is.... still in the works though but its a start. I used an extra steering column cover and fiber glassed a mount for the gauge using 1/8 in Plexiglas as a frame and some felt from walmart. Tomorrow I'm gonna Bondo it and give it a final sand before painting it black to match the interior.
Let me know what you guys think.
PS. i really like the scangauge, its quite useful and Ive been getting 43 MPG around town driving up and down through the Appalachians, and Ive been monitoring intake air temp and recently wrapped my exhaust manny with header wrap and have seen a significant improvement in IAT and MPG...try it before you knock it
. Looks like it sits really flush.
Thread
Thread Starter
Forum
Replies
Last Post
