The FAQ's are Back!
#1
The FAQ's are Back!
I've just finished re-organizing and modernizing the FAQ thread. Please feel free to comment on it here, but please leave the actual FAQ thread for Suggestions only.
The new and improved FAQ's: https://honda-tech.com/zerothread/2247386
<FONT SIZE="3"><FONT COLOR="red">PLEASE NOTE!</FONT></FONT>
If you spot a FAQ thread that has dead image links or outdated information, please REPORT IT (this icon:) stating what is wrong.
The new and improved FAQ's: https://honda-tech.com/zerothread/2247386
<FONT SIZE="3"><FONT COLOR="red">PLEASE NOTE!</FONT></FONT>
If you spot a FAQ thread that has dead image links or outdated information, please REPORT IT (this icon:) stating what is wrong.
#4
Honda-Tech Member
Re: (Harlowe)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LatinEM2 »</TD></TR><TR><TD CLASS="quote">Looks awesome Matt. I like the banners. </TD></TR></TABLE>
x2
x2
#5
Honda-Tech Member
Join Date: Feb 2012
Location: Minnesota
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Re: The FAQ's are Back!
Matt,
Is there a thread for installing a Three Gauge Pillar Pod?
I have the replacement pillar piece and the three gauges but need some additional
information as to how the new replacement piece gets installed.
Thanks in advance - Jerry
Is there a thread for installing a Three Gauge Pillar Pod?
I have the replacement pillar piece and the three gauges but need some additional
information as to how the new replacement piece gets installed.
Thanks in advance - Jerry
#6
Re: The FAQ's are Back!
No, there isn't a thread on installing a 3-gauge pillar pod. To be honest, I would think it'd be similar to just about any other pillar gauge pod installation when referring to wiring. The pillar cover itself just pops off with some panel prybars (if you have them) or a flat-head screwdriver (if you're careful).
Thread
Thread Starter
Forum
Replies
Last Post
949
Honda CRX / EF Civic (1988 - 1991)
7
01-26-2007 09:48 PM
AbitAvenger
Forced Induction
25
03-03-2006 12:13 AM