techsupport

So, I am trying to solve a lighting problem that I have dealt with ever since I bought my 2004 Accord Ex. I have had the car a year now and the front turn signals, hazards and parking lights do not come on at all. The rear turn signals work but the lights and relay blink fast. Only the hazards blink at normal speed but the rear ones are the only ones that light up. At first I thought it was bad bulbs so I replaced them with new ones but this didn't fix the problem. I have read a few posts that are similar to mine and the was mention of replacement LED headlight assemblies not drawing enough current to get the relay to engage and blink. My headlight assembly has the name QINGTIAN stamped on it. So, I think they are after market. I am hoping that someone can point me in the right direction for some trouble shooting tips. I could see how a low amp light not triggering the relay could be a problem with signals and hazards. This would not have anything to do with my parking lights coming on though, so I am somewhat baffled. All bulbs and fuses are good.

Eric

poorman212

Should start with what is missing...power or ground?

techsupport

Poorrman,

Thanks for getting back to me. I have read your replies on the posts that I searched for when I was researching a fix for this problem. I am am going to start working on my car today and will let post my results.

techsupport

Geez Louis,

After a few long hours I think I am closer at getting this solved. The old bulbs that were the wrong ones. I bought new bulbs and tested them out. The parking lights and blinkers were working, but blinking fast. I figured that I could live with it. It wasn't until I tried to inser the bulbs that I discovered they wouldn't fit through the holes. The bulbs I need are are WY21W. I will also need to swap out the sockets.

joedelta

Hello all, I'd really like to know what the fix turned out to be. I just bought an 06 Accord with the exact problem; no front turn signal, rear turn signals work but flash fast. Rears flash normally with hazards, but no front hazards. Any ideas guys? Thanks, Joe