A/C Compressor Harness
07-02-2011, 07:04 PM
#1
Trial User
Thread Starter
Join Date: Jul 2011
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
A/C Compressor Harness
I finally registered, but have come here many times to browse for help. So thanks to everyone who contributes. I finally have a [simple] question that I can't seem to find the answer to.
My A/C went out the other day and I'm in the process of diagnosing the cause. I'm trying to check to make sure I'm getting power to the compressor, but for the life of me, I can't figure out how to disconnect the wiring harness so I can check for voltage. It appears that I have to simultaneously squeeze a tab on the top and another tab on the bottom portion of the harness while pulling it apart, and I've tried that, but without luck.
Any tips? What am I missing?
The vehicle is an '03 Accord EX V6 w/ nav
My A/C went out the other day and I'm in the process of diagnosing the cause. I'm trying to check to make sure I'm getting power to the compressor, but for the life of me, I can't figure out how to disconnect the wiring harness so I can check for voltage. It appears that I have to simultaneously squeeze a tab on the top and another tab on the bottom portion of the harness while pulling it apart, and I've tried that, but without luck.
Any tips? What am I missing?
The vehicle is an '03 Accord EX V6 w/ nav
07-05-2011, 01:02 PM
#3
Trial User
Thread Starter
Join Date: Jul 2011
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Re: A/C Compressor Harness
Ha, I figured I'd get burned for asking such a seemingly dumb question (and that's understandable), but seriously...
Anyone else care to chime in?
Anyone else care to chime in?
07-06-2011, 05:21 PM
#4
Seagull Management
Join Date: Jun 2008
Location: Miramichi, NB, Canada
Posts: 15,150
Likes: 0
Received 24 Likes
on
22 Posts
Re: A/C Compressor Harness
If the connector is attached to metal stay you'll have to squeeze one of the tabs and slide it off the stay before you can unplug it.
Thread
Thread Starter
Forum
Replies
Last Post
