2010 Accord LX - Mode motor not working - Replaced
07-03-2019, 03:38 AM
#1
Trial User
Thread Starter
Join Date: Jul 2019
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
2010 Accord LX - Mode motor not working - Replaced
Hello all:
Trying to debug a Vent Control Mode issue - 2010 Accord 4-Dr LX - nothing happens when the mode is changed from upper vents
to Floor or Defrost. Figured it was the control motor, so I went out and got a new one, plugged it in without mounting it and
started the car, still not movement of the new motor when vent modes are changed.
Looked at all the fuses but none blown.
Anyone know what fuze or relay this device is connected through ?
Thanks in advance.
Trying to debug a Vent Control Mode issue - 2010 Accord 4-Dr LX - nothing happens when the mode is changed from upper vents
to Floor or Defrost. Figured it was the control motor, so I went out and got a new one, plugged it in without mounting it and
started the car, still not movement of the new motor when vent modes are changed.
Looked at all the fuses but none blown.
Anyone know what fuze or relay this device is connected through ?
Thanks in advance.
