Help identifying rear bumper part numbers (2018 accord)
 

My wife backed into my 2018 Accord and broke a molding and reflector circled in the picture. Looking at a parts diagram, can someone confirm that theses are parts 13 and 24 in the diagram? How difficult is it to replace these parts? Thanks a lot.


https://cimg3.ibsrv.net/gimg/honda-t...a54fcfbe86.jpghttps://cimg7.ibsrv.net/gimg/honda-t...cd5de8883c.png

Re: Help identifying rear bumper part numbers (2018 accord)
 

It does look like these parts are 13 and 24. 13 looks like something you can pop in. 24 looks like it's held in by a screw (25)? So I would think you would have to take the rear bumper off.

Since you are DIY, I would run this by the Honda parts counter guy. Get that confirmation. Then say you will think about it, to walk away. Order it yourself and DIY.

Re: Help identifying rear bumper part numbers (2018 accord)
 

Thanks! I ordered the parts and found a youtube video to pop the bumper off. Hopefully it's not too hard to swap the parts out!

Re: Help identifying rear bumper part numbers (2018 accord)
 

I don't know if they mentioned it in the video you watched, but be very careful when setting the bumper down. Set it down on a towel or something to protect if from the ground. I'm seen bumpers get scratched up because the wind was blowing, or guys trip over it, etc.

Re: Help identifying rear bumper part numbers (2018 accord)
 

I still have to do something about that scuff, but otherwise got the job done! Thanks for the tips.
https://cimg7.ibsrv.net/gimg/honda-t...1553c7ec73.jpg

Re: Help identifying rear bumper part numbers (2018 accord)
 

I little touch up paint...Good job, looks great. I know this is a brand new car, but when you add "road dirt" I could hardly tell from the pic.