~~~~OFFICIAL CTR EK9 THREAD~~~~
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2009
Location: Malaysia
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
~~~~OFFICIAL CTR EK9 THREAD~~~~
I found out that there's no such thread in HT. So guys, pls post them up. All REAL CTR EK9 from yr 97-00.
NO CONVERSION PLS.....
NO CONVERSION PLS.....
#6
Honda-Tech Member
Thread Starter
Join Date: Jan 2009
Location: Malaysia
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
Re: ~~~~OFFICIAL CTR EK9 THREAD~~~~
#7
Honda-Tech Member
Thread Starter
Join Date: Jan 2009
Location: Malaysia
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#10
Honda-Tech Member
Join Date: Jul 2007
Location: Aberdeen, Scotland, Scotland
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
Re: ~~~~OFFICIAL CTR EK9 THREAD~~~~
Yup although bit more than meets the eye with my car, looks very standard but far from it
Spoon ECU
Taper ported TB
Coolant lines bypassed from TB
Spoon direct flow intake pipe
Trust panel filter
Lower resonator box removed
Fujitsubo 4-2-1 header
Spoon B-pipe
Spoon N1
All new oem exhaust rubbers
AC removed
Innovative 75A mounts
Lower torque mounts/brackets removed
Spoon resevoir socks
Spoon rad stay bracket
Spoon rad cap
Spoon oil cap
Relocated valve cover earth strap
Mugen shift bushes
ORC 309 single plate lightweight clutch/flywheel kit
DSS stage 0 shafts
Spoon twinblock calipers
Hawk HP+ front / Endless CCX rear pads
EBC blank front / AP dixcel plain rear discs
Goodridge braided hoses with stainless fixings
Motul RBF600 fluid
Cusco replica MCS
New clutch master/slave cylinders
Braided clutch line (soon to be replaced with 1 piece Hel line straight from master to slave)
All new oem honda lower balljoints, track rod inners/outers, ARB drop links front and rear
SPC front camber/castor arms
SPC rear camber arms
Poly ARB mount bushes front and rear
Mugen RTA bushes
Hardrace bushes everywhere else
Buddyclub N+ spec dampers 12k front / 8k rear
Unit 8 H-brace
Spoon front upper strut brace
J's racing rear upper strut brace
Toyo R888 GG 195/50/15
Standard outside besides Spoon decal on boot
Spare wheel/tools/carpet/speaker covers removed from boot
Fair bit of stripping inside
Recaro profi-spg drivers seat on buddyclub racing spec seat rail
Modified DC2 recaro passenger rail
Mugen steering wheel boss
LTB 1" steering wheel spacer
Momo montecarlo 350mm wheel
EG6 sirs oem honda momo horn button
Weight without driver 990kg (quarter tank of fuel)
Spoon ECU
Taper ported TB
Coolant lines bypassed from TB
Spoon direct flow intake pipe
Trust panel filter
Lower resonator box removed
Fujitsubo 4-2-1 header
Spoon B-pipe
Spoon N1
All new oem exhaust rubbers
AC removed
Innovative 75A mounts
Lower torque mounts/brackets removed
Spoon resevoir socks
Spoon rad stay bracket
Spoon rad cap
Spoon oil cap
Relocated valve cover earth strap
Mugen shift bushes
ORC 309 single plate lightweight clutch/flywheel kit
DSS stage 0 shafts
Spoon twinblock calipers
Hawk HP+ front / Endless CCX rear pads
EBC blank front / AP dixcel plain rear discs
Goodridge braided hoses with stainless fixings
Motul RBF600 fluid
Cusco replica MCS
New clutch master/slave cylinders
Braided clutch line (soon to be replaced with 1 piece Hel line straight from master to slave)
All new oem honda lower balljoints, track rod inners/outers, ARB drop links front and rear
SPC front camber/castor arms
SPC rear camber arms
Poly ARB mount bushes front and rear
Mugen RTA bushes
Hardrace bushes everywhere else
Buddyclub N+ spec dampers 12k front / 8k rear
Unit 8 H-brace
Spoon front upper strut brace
J's racing rear upper strut brace
Toyo R888 GG 195/50/15
Standard outside besides Spoon decal on boot
Spare wheel/tools/carpet/speaker covers removed from boot
Fair bit of stripping inside
Recaro profi-spg drivers seat on buddyclub racing spec seat rail
Modified DC2 recaro passenger rail
Mugen steering wheel boss
LTB 1" steering wheel spacer
Momo montecarlo 350mm wheel
EG6 sirs oem honda momo horn button
Weight without driver 990kg (quarter tank of fuel)
#12
Honda-Tech Member
Thread Starter
Join Date: Jan 2009
Location: Malaysia
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
Re: ~~~~OFFICIAL CTR EK9 THREAD~~~~
Yup although bit more than meets the eye with my car, looks very standard but far from it
Spoon ECU
Taper ported TB
Coolant lines bypassed from TB
Spoon direct flow intake pipe
Trust panel filter
Lower resonator box removed
Fujitsubo 4-2-1 header
Spoon B-pipe
Spoon N1
All new oem exhaust rubbers
AC removed
Innovative 75A mounts
Lower torque mounts/brackets removed
Spoon resevoir socks
Spoon rad stay bracket
Spoon rad cap
Spoon oil cap
Relocated valve cover earth strap
Mugen shift bushes
ORC 309 single plate lightweight clutch/flywheel kit
DSS stage 0 shafts
Spoon twinblock calipers
Hawk HP+ front / Endless CCX rear pads
EBC blank front / AP dixcel plain rear discs
Goodridge braided hoses with stainless fixings
Motul RBF600 fluid
Cusco replica MCS
New clutch master/slave cylinders
Braided clutch line (soon to be replaced with 1 piece Hel line straight from master to slave)
All new oem honda lower balljoints, track rod inners/outers, ARB drop links front and rear
SPC front camber/castor arms
SPC rear camber arms
Poly ARB mount bushes front and rear
Mugen RTA bushes
Hardrace bushes everywhere else
Buddyclub N+ spec dampers 12k front / 8k rear
Unit 8 H-brace
Spoon front upper strut brace
J's racing rear upper strut brace
Toyo R888 GG 195/50/15
Standard outside besides Spoon decal on boot
Spare wheel/tools/carpet/speaker covers removed from boot
Fair bit of stripping inside
Recaro profi-spg drivers seat on buddyclub racing spec seat rail
Modified DC2 recaro passenger rail
Mugen steering wheel boss
LTB 1" steering wheel spacer
Momo montecarlo 350mm wheel
EG6 sirs oem honda momo horn button
Weight without driver 990kg (quarter tank of fuel)
Spoon ECU
Taper ported TB
Coolant lines bypassed from TB
Spoon direct flow intake pipe
Trust panel filter
Lower resonator box removed
Fujitsubo 4-2-1 header
Spoon B-pipe
Spoon N1
All new oem exhaust rubbers
AC removed
Innovative 75A mounts
Lower torque mounts/brackets removed
Spoon resevoir socks
Spoon rad stay bracket
Spoon rad cap
Spoon oil cap
Relocated valve cover earth strap
Mugen shift bushes
ORC 309 single plate lightweight clutch/flywheel kit
DSS stage 0 shafts
Spoon twinblock calipers
Hawk HP+ front / Endless CCX rear pads
EBC blank front / AP dixcel plain rear discs
Goodridge braided hoses with stainless fixings
Motul RBF600 fluid
Cusco replica MCS
New clutch master/slave cylinders
Braided clutch line (soon to be replaced with 1 piece Hel line straight from master to slave)
All new oem honda lower balljoints, track rod inners/outers, ARB drop links front and rear
SPC front camber/castor arms
SPC rear camber arms
Poly ARB mount bushes front and rear
Mugen RTA bushes
Hardrace bushes everywhere else
Buddyclub N+ spec dampers 12k front / 8k rear
Unit 8 H-brace
Spoon front upper strut brace
J's racing rear upper strut brace
Toyo R888 GG 195/50/15
Standard outside besides Spoon decal on boot
Spare wheel/tools/carpet/speaker covers removed from boot
Fair bit of stripping inside
Recaro profi-spg drivers seat on buddyclub racing spec seat rail
Modified DC2 recaro passenger rail
Mugen steering wheel boss
LTB 1" steering wheel spacer
Momo montecarlo 350mm wheel
EG6 sirs oem honda momo horn button
Weight without driver 990kg (quarter tank of fuel)
keep it up man. hopefully to see more from ur u..
#13
Honda-Tech Member
Thread Starter
Join Date: Jan 2009
Location: Malaysia
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
#16
Honda-Tech Member
Join Date: Jul 2007
Location: Aberdeen, Scotland, Scotland
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
Re: ~~~~OFFICIAL CTR EK9 THREAD~~~~
WOW those stuff really cost u alot of $$. Good investment, how I wish my place selling SPOON & rest of performances stuff....why weight reduced? track car before...?where's ur front n rear console?don tell me is part of ur weight reduction? haha
keep it up man. hopefully to see more from ur u..
keep it up man. hopefully to see more from ur u..
I do take it on track yes, got some videos etc i could post. Weight has been reduced mostly from alot of the parts i've fitted and then with the stripping inside
Taken 2 years to get it to where it is now, you're right though, spent a fair wack on it and put alot of effort in so far, cheers
Seems i'm quite influential though, my dad now drives a genuine FD2 type R civic, got it imported by the same company that took my car over from japan... www.privateimports.co.uk
#21
Honda-Tech Member
Join Date: Jul 2008
Location: Laurel, DE, US
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
#22
Honda-Tech Member
Re: ~~~~OFFICIAL CTR EK9 THREAD~~~~
my 97 ek9
no recent pics of it. now has spoon n1 and mugen 4-1 header.
also in the wait of Volk TE's and some other good stuff
no recent pics of it. now has spoon n1 and mugen 4-1 header.
also in the wait of Volk TE's and some other good stuff