AMR Engineering

We heard about a local company who make custom turbo manifolds in our area so we decided to check them out. They have a nice clean shop and the work they are producing out of there facility is quality work. So we ended up talking to them about our project and towed the car down to there place. In less than a week the car was ready to be towed back. So with that said we decided to start offering there quality turbo manifolds to our customers since they are not only local to us, but the turn around time and work they did for us was outstanding. Below is a lil information on there company as well as the products they are offering.

D.O.C. Race is an aspiring company in the High Performance industry that will be a household name among speed and swag addicts here in the Northwest. We are bleeding the streets throughout the entire country but definitely hit home here along the west. Our focus is heavily directed towards building top quality turbo manifolds for various vehicles including but not limited too Nissan, Honda, Toyota, Mitsubishi and Mazda street and race bred vehicles. Our fabrication capabilities are well beyond building just turbo manifolds though; we offer a range of hand crafted goodies that are made to order to suite any of your performance needs.

DOC Race manifolds are built in house by our highly trained and skilled fabricators who have years of experience. Our manifolds have been known to make over 900whp and are sold worldwide. Many manifolds have been sold to racers across the country competing in NHRA and BOTI SFWD class. We only use high quality 304 stainless steel tubing with a thick wall to insure absolutely no cracking or warping even under high horsepower applications. We custom make our own collectors which over the years have been developed with the lowest angle possible. This produces minimal exhaust turbulence which equals fast spool and high horsepower capabilities. All manifolds go through a major port and polish process to guarantee the absolute highest flow possible. Our porting process has been dyno proven over and over again to reduce lag as well as aid in peak power.

Our ramhorn manifold has been proven to make over 600whp with the right turbo application. These are very simple yet effective manifolds that have been tested and tried by many racers. It is great for street application. For more information or pictures, visit this link
http://www.docrace.com/_products/ramhorn/ramhorn.php

Retail: $645 plus shipping
HT special: $595 shipped
7 in stock ready to ship

Our top mount B series manifold is one of the best on the market and is our best seller!! We have many customers running this manifold on there race cars with great results. Whether you are looking for 500hp or 1000hp, this manifold will not disappoint you. For more information or pictures, visit this link
http://www.docrace.com/_products/bse...t/topmount.php

Retail:$815 plus shipping
HT special: $745 shipped
2 in stock ready to ship


Twin scroll manifolds are designed to spool large turbos such as the GT42R very fast. So if you need fast spool, this manifold is for you. By dividing chosen runners you can achieve a much smoother exhaust flow which in return makes the turbo more efficient. Great mid-range and top end is also achieved. This design has been put to the test and has been proven by many of our record holders today. This manifold will work great on a street car or an all out race car. To run this manifold, you will need 2 wastegates. You have the option of running twin Tial MVS or twin Tial 44mm wastegates. The capabilities of this manifold is well over 1000whp!! For more information or pictures, visit this link
http://www.docrace.com/_products/twi...twinscroll.php

Retail; $895
HT special: $845 shipped


B series Mini Ram T3 manifold. We have developed this manifold for customers looking for a very simple setup that will get the job done. The Mini Ram is capable of making 400hp and is a great upgrade from a cast log manifold. These come with a T3 flange and your choice of wastegate flange. For more information or pictures, visit this link
http://www.docrace.com/_products/miniram/miniram.php

Retail: $465 plus shipping
HT special: $395 shipped
2 in stock ready to ship



Our top mount D series manifold is one of the best on the market and is our top D series seller!! We have many customers running this manifold on there race cars with great results. Whether you are looking for 500hp or 1000hp, this manifold will not disappoint you. For more information or pictures, visit this link
http://www.docrace.com/_products/dse...t/topmount.php

Retail: $815
HT special: $745 shipped


K series sidewinder manifold. This manifold has been designed to fit various chassis including the RSX and TSX. It works well with transplanted vehicles also such as the Civic, Integra and Accord. Available in both T3 and T4 up to GT42R. For more information or pictures, visit this link
http://www.docrace.com/_products/sid...sidewinder.php


Retail: $865
HT special: $795 shipped



Our bottom mount H series manifold is one of the best on the market. We have quite a few customers running this manifold on there street cars with great results. This bottom mount manifold will utilize the capabilities of the largest turbo you can fit under it. As all of our manifolds do, the H22 manifold goes through the D.O.C. extensive porting process to ensure the best results. For more information or pictures, visit this link
http://www.docrace.com/_products/hse...ottommount.php

Retail: $695 plus shipping
HT special: $645 shipped


MORE DOC Manifolds!!







Here are some pictures of one of the b-series ram horns we have in stock.







Questions?? Please PM US! Thank you.

JumpMan92

nice quality

AMR Engineering

Thank you!

RedTT

Bump for best in customer service!!

AMR Engineering

Thank you!

tscook3

Are there manifold / downpipe / dump tube combos?

Thanks

D.O.C.-Race

We do offer combo's. Let us know what manifold, turbo, wastegate and I can PM you a quote!

AMR Engineering

Replied to all PM's. Thank you!!

DraginX

After all the welding has been done and cooled do you guys mill the flanges flat again? Seriously considering one of these manifolds if so.

AMR Engineering

It is unnecessary when the part is welded properly. I have seen there jigs in person, and I trust there experience. If you have a problem I will take care of it personally. I've had many brands of turbo manifolds, and these guys make quality parts.

Grym

Beautiful products

AMR Engineering

Agreed, thank you!

DraginX

Excellent, how much longer is this sale on for?

AMR Engineering

Till the end of the month.

CRX-510

iTrader: (2)

Any mini ram H manifolds? I have an h2b setup and i dont think the h bottom mount you have advertised would fit do to hood clearance

AMR Engineering

Unfortunatley pal that is the only one currently available. Will let you know if that changes.

AMR Engineering

Tracking numbers sent, and pm's replied to. Thank you for your support.

ryguy2588

iTrader: (11)

Bump for these guys! Ordered a week ago, and they have made it and shipped it already. Can't wait to see it. I'll come back to these guys any time for manifolds, especially for these prices! Thanks guys!

AMR Engineering

No problem buddy, as I stated before we promise fast service, and turn around times for our customers who purchase D.O.C. Race products from us. Good luck on your project, and thank you for the kind words. We hope you love the quality of the manifold they prepared for you.

Andy@AMR

Have a great weekend everyone!

ryguy2588

iTrader: (11)

Gorgeous manifold!

AMR Engineering

Thanks again Sr. As we stated from the very start we are here to offer quality manifolds to H-T members with a fast turn around time. D.O.C. Race makes quality parts. We are very happy that your satisfied with your purchase. Thanks again for your support, and posting a picture of the product you received. Enjoy your weekend.

DraginX

Beautiful!! Can't wait to get mine!

AMR Engineering

We're on top of it. We'll be in touch soon.

DraginX

No worries!