BLOX Turbo Exhaust Manifolds
#27
Honda-Tech Member
Join Date: Oct 2001
Location: Pembroke Pines, Florida, United States
Posts: 6,024
Likes: 0
Received 0 Likes
on
0 Posts
Re: BLOX Turbo Exhaust Manifolds (dan_w_82)
it's flanged for a T3 turbine... so anything with a T3 turbine (T3, T3/T4, etc) would work
#29
Honda-Tech Member
Thread Starter
Re: (EastSideRider)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EastSideRider »</TD></TR><TR><TD CLASS="quote">Is the waste gate flange for a Tial 38mm?</TD></TR></TABLE>
Yes sir, it will work! Thanks!
Yes sir, it will work! Thanks!
#32
Honda-Tech Member
Thread Starter
Re: BLOX Turbo Exhaust Manifolds (ImasterMechanic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ImasterMechanic »</TD></TR><TR><TD CLASS="quote">you got 1 for a DA??</TD></TR></TABLE>
B Series is all we have.
Thanks!
B Series is all we have.
Thanks!
#35
Honda-Tech Member
Thread Starter
Re: BLOX Turbo Exhaust Manifolds (vtecrob16a)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vtecrob16a »</TD></TR><TR><TD CLASS="quote">are they ever going to have the 299 shipped sale again... </TD></TR></TABLE>
Sent you a PM.
Sent you a PM.
#41
Honda-Tech Member
Thread Starter
Re: BLOX Turbo Exhaust Manifolds (DCivic00)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DCivic00 »</TD></TR><TR><TD CLASS="quote">Is there anything for a d-series yet?</TD></TR></TABLE>
Not yet, sorry
Not yet, sorry
#42
Honda-Tech Member
Thread Starter
Re: BLOX Turbo Exhaust Manifolds (Jester_Si)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jester_Si »</TD></TR><TR><TD CLASS="quote">So would there be clearance issues with an sc61, and the block webbing?</TD></TR></TABLE>
Should be fine, but use the wastegate elbow, to tile the wastegate down.
Should be fine, but use the wastegate elbow, to tile the wastegate down.
#44
Honda-Tech Member
Thread Starter
Re: BLOX Turbo Exhaust Manifolds (M.A.R.C.)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by M.A.R.C. »</TD></TR><TR><TD CLASS="quote">bump for a good price and a good manifold!
3" dp with a/c kicks ***!!!</TD></TR></TABLE>
3" dp with a/c kicks ***!!!</TD></TR></TABLE>
#45
Honda-Tech Member
Re: BLOX Turbo Exhaust Manifolds (prostreetonline)
i already shaved my webbing for my max rev log mani and t3/t4 57trim ar60. so i can use the blox with the sc61 and just shave a little off the webbing?
#46
Honda-Tech Member
Thread Starter
Re: BLOX Turbo Exhaust Manifolds (arsenic57)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by arsenic57 »</TD></TR><TR><TD CLASS="quote">i already shaved my webbing for my max rev log mani and t3/t4 57trim ar60. so i can use the blox with the sc61 and just shave a little off the webbing?</TD></TR></TABLE>
You can just get the little elbow... are you worried about the external hitting the hood? Not sure I understand the question...
You can just get the little elbow... are you worried about the external hitting the hood? Not sure I understand the question...
#47
Honda-Tech Member
Re: BLOX Turbo Exhaust Manifolds (prostreetonline)
talking about where the compressor housing usually hits the block, and you never did PM me back on a price on the blox.
#49
Honda-Tech Member
Thread Starter
Re: BLOX Turbo Exhaust Manifolds (turbocrx951)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbocrx951 »</TD></TR><TR><TD CLASS="quote">how much</TD></TR></TABLE>
Sent you a PM.
Sent you a PM.