Winter build up for my drag car
#1
Thread Starter
iTrader: (2)
Winter build up for my drag car
Well I started assembling things. I had to wait for the snow to fall to do it, i hate snow. But anyway, here are some pics of what is going on. I will keep this thread updated as it progresses. It is my drag car project. Low budget for now.
Block
B16A2 Block bored/honed
B16A2 crank polished
Arias 81.5mm pistons with coating
Eagle H-beams with ARP rod bolts
ACL bearings
ARP headstuds
ITR oil pump
New water pump
OEM headgasket
Blox intake manifold
GSR Throttle Body
Drivetrain
JDM GSR Tranny
Lightened flywheel
Clutch Specialties 6-puck unsprung clutch
Head
B17 head
95 GSR cams
Cam gears
Turbo setup
ITS 50trim for now T3/T04e
RLD-Fab Ramhorn Manifold Kit ( welded by Dave )
Tial 38mm gate
990CC injectors
Custom 9" intercooler
Tial BOV
Stealthmode oil line kit and oil gauge kit
well here are some pics of the motor build. Just did this today. This one went a lot smoother than the first one I built.
Nice clean block
Arias with the Eagles on there.. damn spiral retaining clips are a pain in the ***.
Work station
Everything installed, picture of the crank.
Bottom end is done, minus the accesories.
Just for some for here are pics of the car it is going into.
UPDATED 2/10/06
UPDATED 3/27/06
The motor is in the car!! Everything went smooth, now I just have to finish the turbo kit and mount the intercooler and figure out where and how I want to route things. I think I am doing a custom backdoor intecooler and there will only be 4 connections. Turbo -> intercooler, then intercooler -> TB. Because of the fiberglass front end I believe I can do that.
More to come this weekend when I go home to finish off the turbo kit.
Modified by 93turbo16 at 3:20 PM 11/24/2005
Modified by 93turbo16 at 11:43 PM 2/10/2006
Modified by 93turbo16 at 11:19 AM 2/12/2006
Modified by 93turbo16 at 3:53 PM 3/27/2006
Modified by 93turbo16 at 3:54 PM 3/27/2006
Modified by 93turbo16 at 7:11 PM 3/28/2006
Modified by 93turbo16 at 7:12 PM 3/28/2006
Block
B16A2 Block bored/honed
B16A2 crank polished
Arias 81.5mm pistons with coating
Eagle H-beams with ARP rod bolts
ACL bearings
ARP headstuds
ITR oil pump
New water pump
OEM headgasket
Blox intake manifold
GSR Throttle Body
Drivetrain
JDM GSR Tranny
Lightened flywheel
Clutch Specialties 6-puck unsprung clutch
Head
B17 head
95 GSR cams
Cam gears
Turbo setup
ITS 50trim for now T3/T04e
RLD-Fab Ramhorn Manifold Kit ( welded by Dave )
Tial 38mm gate
990CC injectors
Custom 9" intercooler
Tial BOV
Stealthmode oil line kit and oil gauge kit
well here are some pics of the motor build. Just did this today. This one went a lot smoother than the first one I built.
Nice clean block
Arias with the Eagles on there.. damn spiral retaining clips are a pain in the ***.
Work station
Everything installed, picture of the crank.
Bottom end is done, minus the accesories.
Just for some for here are pics of the car it is going into.
UPDATED 2/10/06
UPDATED 3/27/06
The motor is in the car!! Everything went smooth, now I just have to finish the turbo kit and mount the intercooler and figure out where and how I want to route things. I think I am doing a custom backdoor intecooler and there will only be 4 connections. Turbo -> intercooler, then intercooler -> TB. Because of the fiberglass front end I believe I can do that.
More to come this weekend when I go home to finish off the turbo kit.
Modified by 93turbo16 at 3:20 PM 11/24/2005
Modified by 93turbo16 at 11:43 PM 2/10/2006
Modified by 93turbo16 at 11:19 AM 2/12/2006
Modified by 93turbo16 at 3:53 PM 3/27/2006
Modified by 93turbo16 at 3:54 PM 3/27/2006
Modified by 93turbo16 at 7:11 PM 3/28/2006
Modified by 93turbo16 at 7:12 PM 3/28/2006
#7
Thread Starter
iTrader: (2)
Re: (PA MATT)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PA MATT »</TD></TR><TR><TD CLASS="quote">looking good man. too bad my single cam will be faster....
...yeh right </TD></TR></TABLE>
LoL. SOHC for life y0
Here is a pic of the turbo and the B17 head.
...yeh right </TD></TR></TABLE>
LoL. SOHC for life y0
Here is a pic of the turbo and the B17 head.
Trending Topics
#8
Member
Join Date: Jun 2004
Location: Seattle, WA, USA
Posts: 1,125
Likes: 0
Received 0 Likes
on
0 Posts
looks good man take your time its a long winter ahead of us and i think we are all building at this time wether is budget like you and me or full race haha but just take your time im gonna kill myself if i end up rushing things and breaking the first time i hit the track haha but looks good man
#10
Thread Starter
iTrader: (2)
Re: (AllmotorEH2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AllmotorEH2 »</TD></TR><TR><TD CLASS="quote">looks good man take your time its a long winter ahead of us and i think we are all building at this time wether is budget like you and me or full race haha but just take your time im gonna kill myself if i end up rushing things and breaking the first time i hit the track haha but looks good man</TD></TR></TABLE>
Thanks man. Good luck to you as well. I am stepping up to a sleeved block probably next year.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nonvtecD »</TD></TR><TR><TD CLASS="quote">Lookin good John, when do I get a ride in that thing?</TD></TR></TABLE>
When it gets done you have to come down here, maybe put your car on the dyno.
Thanks man. Good luck to you as well. I am stepping up to a sleeved block probably next year.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nonvtecD »</TD></TR><TR><TD CLASS="quote">Lookin good John, when do I get a ride in that thing?</TD></TR></TABLE>
When it gets done you have to come down here, maybe put your car on the dyno.
#11
Honda-Tech Member
Join Date: Jul 2004
Location: Carlisle, PA, united states
Posts: 1,557
Likes: 0
Received 0 Likes
on
0 Posts
Re: (nonvtecD)
well its coming together just as planned...wa hahahaha
too bad it still wont beat the sol....just playing.....cant wait to take this thing for a drive down the 1320 against the K.
too bad it still wont beat the sol....just playing.....cant wait to take this thing for a drive down the 1320 against the K.
#14
Thread Starter
iTrader: (2)
Re: (komat)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SOHC_MShue »</TD></TR><TR><TD CLASS="quote">Heck yea! Can't wait to see what kind of numbers you put down </TD></TR></TABLE>
I am looking for in the 400s for this season. That would be just splendid.
We gotta get together sometime, I am sure there will be events near you.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by komat »</TD></TR><TR><TD CLASS="quote">we have to race when i get my built over the winter:-D
after you tune it </TD></TR></TABLE>
Looking forward to it. Must be street tires though.
I am looking for in the 400s for this season. That would be just splendid.
We gotta get together sometime, I am sure there will be events near you.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by komat »</TD></TR><TR><TD CLASS="quote">we have to race when i get my built over the winter:-D
after you tune it </TD></TR></TABLE>
Looking forward to it. Must be street tires though.
#16
Honda-Tech Member
Re: (93turbo16)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93turbo16 »</TD></TR><TR><TD CLASS="quote">
I am looking for in the 400s for this season. That would be just splendid.
We gotta get together sometime, I am sure there will be events near you.
</TD></TR></TABLE>
Yea 400 will be a lot of fun. Hopefully you can hit 10's on a tire We should meet at MIR sometime whenever they have an event there next season.
I am looking for in the 400s for this season. That would be just splendid.
We gotta get together sometime, I am sure there will be events near you.
</TD></TR></TABLE>
Yea 400 will be a lot of fun. Hopefully you can hit 10's on a tire We should meet at MIR sometime whenever they have an event there next season.
#18
Thread Starter
iTrader: (2)
Re: (sohc_turd)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sohc_turd »</TD></TR><TR><TD CLASS="quote">looks good man. What ever happened to your vitara build?
</TD></TR></TABLE>
I actually sold the car, I picked up a K20A2 hatch from Cody at Lovefab.
</TD></TR></TABLE>
I actually sold the car, I picked up a K20A2 hatch from Cody at Lovefab.
#19
Thread Starter
iTrader: (2)
Re: (SOHC_MShue)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SOHC_MShue »</TD></TR><TR><TD CLASS="quote">
Yea 400 will be a lot of fun. Hopefully you can hit 10's on a tire We should meet at MIR sometime whenever they have an event there next season. </TD></TR></TABLE>
10s would be awesome. But I will seriously settle for mid 11s this year.
Yea 400 will be a lot of fun. Hopefully you can hit 10's on a tire We should meet at MIR sometime whenever they have an event there next season. </TD></TR></TABLE>
10s would be awesome. But I will seriously settle for mid 11s this year.
#21
Honda-Tech Member
Re: (93turbo16)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93turbo16 »</TD></TR><TR><TD CLASS="quote">10s would be awesome. But I will seriously settle for mid 11s this year. </TD></TR></TABLE>
Yea mid 11's will be no problem.
Yea mid 11's will be no problem.
#24
Re: (PA MATT)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PA MATT »</TD></TR><TR><TD CLASS="quote">I have my 10 gallon bucket ready to bolt in the passenger seat as soon as this thing gets going </TD></TR></TABLE>
At least you live in the same state.
At least you live in the same state.
#25
Thread Starter
iTrader: (2)
Re: (PA MATT)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PA MATT »</TD></TR><TR><TD CLASS="quote">I have my 10 gallon bucket ready to bolt in the passenger seat as soon as this thing gets going </TD></TR></TABLE>
I will make provisions for your bucket.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1995Civic »</TD></TR><TR><TD CLASS="quote">
At least you live in the same state. </TD></TR></TABLE>
Yea, I dunno how you are getting up here.
I will make provisions for your bucket.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1995Civic »</TD></TR><TR><TD CLASS="quote">
At least you live in the same state. </TD></TR></TABLE>
Yea, I dunno how you are getting up here.