RACEPAK

hello everyone,

just wondering from where every one else supplied 12v when lights on for your gauges?

mine three gauges are wired togather to a + from the gauge cluster, which i dont think is very good,

thanks

maddog20

mine are hooked to the dimmer switch

1158

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by maddog20 &raquo;</TD></TR><TR><TD CLASS="quote">mine are hooked to the dimmer switch</TD></TR></TABLE>

x2

That's exactly what I did.

DeadVet

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1158 &raquo;</TD></TR><TR><TD CLASS="quote">

x2

That's exactly what I did.</TD></TR></TABLE>

x3

95dc2teg

i powered mine through my radio.. any 12v power source that turns on with the turn of the key should be suffice

1158

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 95dc2teg &raquo;</TD></TR><TR><TD CLASS="quote">i powered mine through my radio.. any 12v power source that turns on with the turn of the key should be suffice</TD></TR></TABLE>

That's correct, but I wanted the lights in the gauges to dim with the rest of the lights. The dimmer has three wire coming out of it. Red, black, and red with black stripes. I think I had to splice into the red and the red/black but it was over a year ago...so I can't promise you that I am correct.

B18EG6

most fuseboxes have +12v const and +12v illumination pre-wired, all ya need is a spade connector

Topdawgg

dimmer switch