Hoosier Daddy

I have a T28 with HKS manifold. How much boost are these turbos good for? Any estimated HP #'s they peak at? Thanks

FourG63 97GST

I boost 20psi on my T28 :D
I dont have a honda, but it gives you an idea.

T-RO

Aww that T28 is only gonna boost about 4psi and get you an additional +50hp.
Go ahead and send it to me and i'll send you a nice shiny T25. lol

Hoosier Daddy

Is 350-400whp unrealistic with this turbo? I have a B18A with some mods.

B18A block - Bored .20
JE Pistons
Eagle H-Beam Rods
STR Block Guard
Skunk 2 Intake Manifold
EF-1 L28 Cams
Skunk 2 Cam Gears
ARP Head Studs

VaporTrail

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hoosier Daddy &raquo;</TD></TR><TR><TD CLASS="quote">Is 350-400whp unrealistic with this turbo? I have a B18A with some mods.</TD></TR></TABLE>

Yes, it is unrealistic. The T28 has a 31lb compressor, most I've heard of (unverified) is 320whp.

10seceg

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VaporTrail &raquo;</TD></TR><TR><TD CLASS="quote">

Yes, it is unrealistic. The T28 has a 31lb compressor, most I've heard of (unverified) is 320whp. </TD></TR></TABLE>

yea man...sell that and get a nice t3 or t3/t04

Hoosier Daddy

Well this just sucks Is it even worth it with my setup, or should I stick with whatever I can get out of this turbo?

VaporTrail

you can answer that. What are you goals? If they exceed 300hp, you should consider something else...

Hoosier Daddy

It's all for sale.

Seriously

How would a SFP manifold and T3/T04D do?

SiBirdie

T25/T28 are cute turbo but not up to task with the big boys get a T3/T04E, you'll be much more happy.

Hoosier Daddy

t04e over t04d? Isn't that too large?

hypa

T3 is good for upwards of 350whp.
Plus, they're cheap and common.

DaX

iTrader: (1)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hoosier Daddy &raquo;</TD></TR><TR><TD CLASS="quote">t04e over t04d? Isn't that too large?</TD></TR></TABLE>

T04E compressor housing, T3 turbine housing. It isn't too large...almost perfect actually.

Hoosier Daddy

Doh! t04e is what I was thinking in my mind. 60ar right?

DaX

iTrader: (1)

Mine is .60AR compressor, .48AR turbine, 60 trim wheel.

Hoosier Daddy

Exactly what i'm looking into. Think it can produce 400whp?

DaX

iTrader: (1)

I think it will. I'm only going to run 0.4 bar until I can afford to build my block, but I went ahead and bought a large turbo so that I wouldn't have to buy a new one when i wanted to boost more.

Hoosier Daddy

Saves you $ in the long run. I never planned on building my motor, but now that I have I need something a little larger

90civichbsi

iTrader: (1)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hoosier Daddy &raquo;</TD></TR><TR><TD CLASS="quote">Well this just sucks Is it even worth it with my setup, or should I stick with whatever I can get out of this turbo?</TD></TR></TABLE>

depends on what you want, that turbo can make around 300 at most but b/c of the size, you get boost alot sooner as compared to a t3/t4. that turbo can be a very fun streetable turbo.

But if your lookin for an all out high horsepower drag turbo. look elsewhere

Cyber ITR

my car has 200whp on 6-7psi , stock jdm b18c(1) with standalone computer , 2.5" downpipe , 3" exhaust

HAHAV8's

Just wondering how much u were asking for the turbo and It would be good for a sohc 1.6 honda motor right? smaller motor=smaller turbo right? u can e-mail me at n1ckhorvath@yahoo.com

HAHAV8's

sorry i not sure if my 1st post went threw so i am interested in your turbo. I am under the impression that is would be good for a sohc honda. You can e mail me at n1ckhorvath@yahoo.com


thanks man