what valves, valvesprings, and retainers are you running with turbo and where did you get them?
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2004
Location: MD
Posts: 3,177
Likes: 0
Received 0 Likes
on
0 Posts
what valves, valvesprings, and retainers are you running with turbo and where did you get them?
b series vtec guys, what valves, valvesprings, and retainers are you running with turbo and where did you get them?
also what power do you make,and how high do you rev?
also what power do you make,and how high do you rev?
#2
Re: what valves, valvesprings, and retainers are you running with turbo and where did you get them?
Contact Rocket Motorsports:
Honda-Tech name : Rocket
E-mail : RocketMartin@yahoo.com
He has some nice stuff
Vince
Golden Eagle Mfg.
Honda-Tech name : Rocket
E-mail : RocketMartin@yahoo.com
He has some nice stuff
Vince
Golden Eagle Mfg.
#3
Re: what valves, valvesprings, and retainers are you running with turbo and where did you get them?
skunk 2 everything...only going to 8500-9000 (its my daily driver) and I am scared to break it haha
It made 375@ 8000rpm....I'll be re-tuning it to 9000 in about a week or two (it just got sleeved=more boost).
It made 375@ 8000rpm....I'll be re-tuning it to 9000 in about a week or two (it just got sleeved=more boost).
#4
Honda-Tech Member
Join Date: Mar 2003
Location: TX
Posts: 4,151
Likes: 0
Received 0 Likes
on
0 Posts
Re: what valves, valvesprings, and retainers are you running with turbo and where did you get them?
supertech from Earl....391whp...8500
re-tuning in july sometime with new goodies
re-tuning in july sometime with new goodies
#5
Member
Re: what valves, valvesprings, and retainers are you running with turbo and where did you get them?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B16Civic93 »</TD></TR><TR><TD CLASS="quote">b series vtec guys, what valves, valvesprings, and retainers are you running with turbo and where did you get them?
also what power do you make,and how high do you rev?</TD></TR></TABLE>
Supertech Nitride coated valves, Supertech Ti retainers, Supertech Dual Valve springs.
Purchased for a great deal from Earl here on honda-tech .
Boost cut set @ a low 9,500 Rpm with hondata s200 because I don't need to rev higher(small turbo gets out of breath at those rpms).
376 whp low boost setting, 441 whp high boost setting(B18c1 stock sleeves)
They really aren't necessary outside the fact that I have peace of mind that I won't have valve float and if I mis-shift and rev to 11,000 rpm my head won't fall apart.
also what power do you make,and how high do you rev?</TD></TR></TABLE>
Supertech Nitride coated valves, Supertech Ti retainers, Supertech Dual Valve springs.
Purchased for a great deal from Earl here on honda-tech .
Boost cut set @ a low 9,500 Rpm with hondata s200 because I don't need to rev higher(small turbo gets out of breath at those rpms).
376 whp low boost setting, 441 whp high boost setting(B18c1 stock sleeves)
They really aren't necessary outside the fact that I have peace of mind that I won't have valve float and if I mis-shift and rev to 11,000 rpm my head won't fall apart.
Thread
Thread Starter
Forum
Replies
Last Post