what tuning software to use in my d16z6
11-02-2007, 02:46 PM
#1
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: crownsville, md, usa
Posts: 1,083
Likes: 0
Received 0 Likes
on
0 Posts
what tuning software to use in my d16z6
im getting ready to turbo my car and was wondering what software i should use i would like a 2 step and its going to see mostly treet use and some track use
11-02-2007, 06:08 PM
#4
Honda-Tech Member
Join Date: Dec 2003
Location: Winchester, VA, USA
Posts: 1,286
Likes: 0
Received 0 Likes
on
0 Posts
Re: (da_dude)
Crome with an aftermarket MSD ignition box with 2step. That's the only way with a free EMS. Crome's 2step is a fuel cut rev limiter which doesn't work too well. A real 2step should cut ignition to flood the exhaust manifold with fuel and then a super retarded spark which builds boost.
Or wait a while for Ectune to come out, or go with Neptune or Hondata for a proven system right now. Out of those three if I had all the time in the world I would use Crome until Ectune comes out, because Ectune has some truly awesome features.
Or wait a while for Ectune to come out, or go with Neptune or Hondata for a proven system right now. Out of those three if I had all the time in the world I would use Crome until Ectune comes out, because Ectune has some truly awesome features.
11-02-2007, 06:19 PM
#6
Honda-Tech Member
Join Date: Dec 2003
Location: Winchester, VA, USA
Posts: 1,286
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Schister66)
Yeah, Crome's good, but some people notice some funky timing problems with it, like when they change it on the map it doesn't have an effect. I just retard the dizzy a degree or two just in case.
Trending Topics
11-03-2007, 08:53 PM
#8
iTrader: (2)
Re: what tuning software to use in my d16z6 (jdm inc)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdm inc »</TD></TR><TR><TD CLASS="quote">hondata s300 w/boost option 
</TD></TR></TABLE>
eCtune, Hondata, Neptune
</TD></TR></TABLE>eCtune, Hondata, Neptune
11-03-2007, 09:49 PM
#9
Honda-Tech Member
Join Date: Jul 2006
Location: missouri
Posts: 4,009
Likes: 0
Received 0 Likes
on
0 Posts
Re: what tuning software to use in my d16z6 (jdm inc)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdm inc »</TD></TR><TR><TD CLASS="quote">hondata s300 w/boost option </TD></TR></TABLE>
uhhh all s300s are boost ready.
</TD></TR></TABLE>uhhh all s300s are boost ready.
11-07-2007, 10:58 AM
#11
Honda-Tech Member
Join Date: Jan 2003
Location: san diego, ca, usa
Posts: 1,457
Likes: 0
Received 0 Likes
on
0 Posts
Re: (bigbadboy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bigbadboy »</TD></TR><TR><TD CLASS="quote">he means with the boost control option. but yes S300 3-step FTW. open DP sounds like gun shots. can get some vid if you like 
</TD></TR></TABLE>
Vids!
</TD></TR></TABLE>Vids!
Thread
Thread Starter
Forum
Replies
Last Post
a1320honda
Engine Management and Tuning
5
05-10-2013 06:01 PM
4dooritr
Engine Management and Tuning
10
07-05-2009 04:33 PM
