What pistons/rods to get for stock crx si motor?
#1
Member
Thread Starter
Join Date: Mar 2002
Location: Los Angeles, Mountain Pass, USA
Posts: 1,229
Likes: 0
Received 0 Likes
on
0 Posts
What pistons/rods to get for stock crx si motor?
Hi, I plan on building my stock 90crx si engine for boost(havent got boost yet), and I have been trying to decide which pistons to get. There is a group by for wiseco pistons but on the wiseco website pdf-- http://www.wiseco.com/PDFcatalogs/20...act_screen.pdf
there is only a aplication for d16y8 and d16z, they are pretty much the same size except for comp. height and dome volume(cc).
d16y8 comp. height 30.16mm dome volume 14.cc-
d16z comp. height 29.82mm dome volume 15.4cc-
And Info would be greatly appreciated
I also plan to use eagle rods, and I am wondering what other parts I should get for high boost(12+psi), sleeves? valves? retainers? springs?
THANKS!
[Modified by NINJASPY, 8:57 AM 5/7/2002]
there is only a aplication for d16y8 and d16z, they are pretty much the same size except for comp. height and dome volume(cc).
d16y8 comp. height 30.16mm dome volume 14.cc-
d16z comp. height 29.82mm dome volume 15.4cc-
And Info would be greatly appreciated
I also plan to use eagle rods, and I am wondering what other parts I should get for high boost(12+psi), sleeves? valves? retainers? springs?
THANKS!
[Modified by NINJASPY, 8:57 AM 5/7/2002]
Thread
Thread Starter
Forum
Replies
Last Post