What is the OHM reading for the Bosch 1000cc Injector Dynamics....
03-30-2009, 03:00 PM
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Mar 2003
Location: Louisville, KY, USA
Posts: 3,662
Likes: 0
Received 0 Likes
on
0 Posts
What is the OHM reading for the Bosch 1000cc Injector Dynamics....
My volt meter is dead, and I am curious on the OHMs of these, anyone know?
03-30-2009, 08:20 PM
#3
Honda-Tech Member
Re: What is the OHM reading for the Bosch 1000cc Injector Dynamics....
12ish.
Why does it matter? What are you trying to do?
BTW, if you're doing what I think you're doing, you can't choose dead times in the autronic based off the injector's resistance. Injetor dead time isn't based on that.
Why does it matter? What are you trying to do?
BTW, if you're doing what I think you're doing, you can't choose dead times in the autronic based off the injector's resistance. Injetor dead time isn't based on that.
03-31-2009, 02:14 AM
#4
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Mar 2003
Location: Louisville, KY, USA
Posts: 3,662
Likes: 0
Received 0 Likes
on
0 Posts
Re: What is the OHM reading for the Bosch 1000cc Injector Dynamics....
nah, my ecu has a list of bosch injectors with part #s and Ohms... etc... and i am trying to find the best match
03-31-2009, 05:41 AM
#5
Honda-Tech Member
Re: What is the OHM reading for the Bosch 1000cc Injector Dynamics....
When you choose a part number and select it, or before hand, does it tell you what the dead times are?
Trending Topics
03-31-2009, 02:45 PM
#10
Honda-Tech Member
Join Date: Jan 2005
Location: b00sting my D16s, SoWis, USA
Posts: 7,015
Likes: 0
Received 7 Likes
on
5 Posts
Re: What is the OHM reading for the Bosch 1000cc Injector Dynamics....
If I'm not mistake, these injectors won't be similar enough to stock Bosch parts to make those selections accurate. You'd have to input the values that I.D. has given.
03-31-2009, 06:38 PM
#13
Honda-Tech Member
04-01-2009, 02:07 AM
#14
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Mar 2003
Location: Louisville, KY, USA
Posts: 3,662
Likes: 0
Received 0 Likes
on
0 Posts
Re: What is the OHM reading for the Bosch 1000cc Injector Dynamics....
Ok, first off, before you try and make an assumption, YES, I did read them.
I am NOT a tuner, I dont have alot of knowledge on it. I build and fab. NOT tune. So working with an EMS and calibrations is not my cup of tea yet, i am still learning.
I looked all over the best I could on my autronic for the best match to what the instructions said that I DID read. I am not a moron, I just need to get acclimated with my EMS. So sorrrrrrrry. The guys who tune my car can do this, I just wanted to give it a crack before I towed it to the dyno. Shoot me.
So, thanks SrMofo for an attempt to make me look like a stoop and agree with Tony when you have no idea what is going on, on my side of the table. Seems like everyone else on here.
Tony, thanks for the help, legitimately, I will have it running today or tomorrow!!!
I am NOT a tuner, I dont have alot of knowledge on it. I build and fab. NOT tune. So working with an EMS and calibrations is not my cup of tea yet, i am still learning.
I looked all over the best I could on my autronic for the best match to what the instructions said that I DID read. I am not a moron, I just need to get acclimated with my EMS. So sorrrrrrrry. The guys who tune my car can do this, I just wanted to give it a crack before I towed it to the dyno. Shoot me.
So, thanks SrMofo for an attempt to make me look like a stoop and agree with Tony when you have no idea what is going on, on my side of the table. Seems like everyone else on here.
Tony, thanks for the help, legitimately, I will have it running today or tomorrow!!!
Last edited by wade; 04-01-2009 at 02:27 AM.
04-01-2009, 06:08 AM
#15
Honda-Tech Member
Re: What is the OHM reading for the Bosch 1000cc Injector Dynamics....
You know we love you Wade. Give me a call if you get in a bind on it. I'm not an Autronic fan by any means, you know that, lol, but I can probably help.
04-01-2009, 02:42 PM
#16
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Mar 2003
Location: Louisville, KY, USA
Posts: 3,662
Likes: 0
Received 0 Likes
on
0 Posts
Re: What is the OHM reading for the Bosch 1000cc Injector Dynamics....
Sooner or later I will go AEM or motec, time will tell and how well the car performs. TOmorrow I think it hits the dyno on 14.7psi 93 octane tune and getting it to run. If if have issues, I will call. thanks man!
04-01-2009, 03:06 PM
#17
Honda-Tech Member
Re: What is the OHM reading for the Bosch 1000cc Injector Dynamics....
im not 100% sure, but i think there are rules against using AEM and Motec in the same sentence in the way you just did LOL
"i think today i am either going to buy a new Kia or a new Porsche"
"i think today i am either going to buy a new Kia or a new Porsche"
04-01-2009, 03:56 PM
#18
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Mar 2003
Location: Louisville, KY, USA
Posts: 3,662
Likes: 0
Received 0 Likes
on
0 Posts
Re: What is the OHM reading for the Bosch 1000cc Injector Dynamics....
i understand joe, lol. I just was stating what I can possibly work with if I get the money
04-01-2009, 06:52 PM
#19
Honda-Tech Member
Re: What is the OHM reading for the Bosch 1000cc Injector Dynamics....
haha i totally understand. i already made the mistake of using AEM myself.
at this point, i'd rather not race than use another brand ECU. best money i have ever spent. hell a M400 would work just fine, i got the 800 simply so i will never have to buy another ECU, even if i end up with a few more cylinders or something lol
at this point, i'd rather not race than use another brand ECU. best money i have ever spent. hell a M400 would work just fine, i got the 800 simply so i will never have to buy another ECU, even if i end up with a few more cylinders or something lol
04-02-2009, 02:52 PM
#20
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Mar 2003
Location: Louisville, KY, USA
Posts: 3,662
Likes: 0
Received 0 Likes
on
0 Posts
Re: What is the OHM reading for the Bosch 1000cc Injector Dynamics....
Dyno'd it today. Went well. No misfires or anything of that nature.
Checked timing due to the TQ falling off a little more than we would expect, and timing for some reason was off by 5 degrees from where it was first set (5 degrees retarded).
It started to rain, so end of day. We will work on it Friday. Fuel was kinda on the fat side as well. Friday will be the day
Vids will be up soon.
Made 355WHP on Dyno Dynamics machine @ 16-17PSI and roughly 425whp on a Mustang Dyno (converted).
We will prob be able to get about 25 more WHP out of it with the timing getting all lined out.
Once I get my 800dollar boost controller, then she gets turned up!
Checked timing due to the TQ falling off a little more than we would expect, and timing for some reason was off by 5 degrees from where it was first set (5 degrees retarded).
It started to rain, so end of day. We will work on it Friday. Fuel was kinda on the fat side as well. Friday will be the day
Vids will be up soon.
Made 355WHP on Dyno Dynamics machine @ 16-17PSI and roughly 425whp on a Mustang Dyno (converted).
We will prob be able to get about 25 more WHP out of it with the timing getting all lined out.
Once I get my 800dollar boost controller, then she gets turned up!
04-02-2009, 04:59 PM
#23
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Mar 2003
Location: Louisville, KY, USA
Posts: 3,662
Likes: 0
Received 0 Likes
on
0 Posts
Re: What is the OHM reading for the Bosch 1000cc Injector Dynamics....
Yes, I know the car is ugly. it will all be satin black sooner or later. Picking up the Bogart rear drag skinnies tomorrow!
here are the pumpgas, low boost vids
http://www.youtube.com/watch?v=aIh7_PNwwqg
http://www.youtube.com/watch?v=020Y-Tlfzvs
http://www.youtube.com/watch?v=CofSbu9S0hk
here are the pumpgas, low boost vids
http://www.youtube.com/watch?v=aIh7_PNwwqg
http://www.youtube.com/watch?v=020Y-Tlfzvs
http://www.youtube.com/watch?v=CofSbu9S0hk
04-03-2009, 02:03 AM
#25
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Mar 2003
Location: Louisville, KY, USA
Posts: 3,662
Likes: 0
Received 0 Likes
on
0 Posts
Re: What is the OHM reading for the Bosch 1000cc Injector Dynamics....
wtf/. It is portable, and we had it out side so we didnt stink up the shop of gas while we had customers in there.
Thread
Thread Starter
Forum
Replies
Last Post
phiberoptik
Forced Induction
12
02-10-2004 06:41 AM
