What Cams are you using if you have Nitrous in you car?
04-30-2002, 11:50 PM
#1
Junior Member
Thread Starter
Join Date: Feb 2002
Location: Slowlane
Posts: 847
Likes: 0
Received 0 Likes
on
0 Posts
What Cams are you using if you have Nitrous in you car?
What cams are you running in your setup with nitrous? My D16 will be coming out soon.. Going in will be a GSR (after built)
The motor B18C1.
Nitrous setup-wet setup 75 shot (single fogger), or 125-150 (direct port)
C/R will be 11:1 or 11.5:1
Block will be resleveed to 84.5 etc..
Head will be mild p/p etc..
The cams I am looking at possible are
Skunk Stage 1's
JUN 2's
Toda A's
or CTR cams..
I have all the need fuel/ignition mods- MSD Digital 6, fuel pump, fuel filter-currently from my setup on my D16.
Cap, coil, wires, fpr, fuel rail, and injectors will be purchased for the B18c1.
I also have Hondata for tuning, and also a J&S safeguard.
So to the people here with nitrous what are you suggestions on cams to be used?
Thx
The motor B18C1.
Nitrous setup-wet setup 75 shot (single fogger), or 125-150 (direct port)
C/R will be 11:1 or 11.5:1
Block will be resleveed to 84.5 etc..
Head will be mild p/p etc..
The cams I am looking at possible are
Skunk Stage 1's
JUN 2's
Toda A's
or CTR cams..
I have all the need fuel/ignition mods- MSD Digital 6, fuel pump, fuel filter-currently from my setup on my D16.
Cap, coil, wires, fpr, fuel rail, and injectors will be purchased for the B18c1.
I also have Hondata for tuning, and also a J&S safeguard.
So to the people here with nitrous what are you suggestions on cams to be used?
Thx
Thread
Thread Starter
Forum
Replies
Last Post
Midwestrider
Acura Integra
9
05-01-2002 10:19 PM
Midwestrider
Forced Induction
17
05-01-2002 07:07 PM
Midwestrider
Forced Induction
2
05-01-2002 09:28 AM
