what are the best traction bars out there right now
#3
Re: what are the best traction bars out there right now (dustin)
ya im debating over Full-Race or Lcon
Full Race is about 335 shipped
and Camp does L Con for about 299 Shipped
For the 92-00 Civic i have herd both are very good and people love em, for the ef it's a different story.
Full Race is about 335 shipped
and Camp does L Con for about 299 Shipped
For the 92-00 Civic i have herd both are very good and people love em, for the ef it's a different story.
#6
Honda-Tech Member
Join Date: Mar 2002
Location: sacramento, ca, usa
Posts: 3,818
Likes: 0
Received 0 Likes
on
0 Posts
Re: what are the best traction bars out there right now (SPOON_BeIgHtEeNsEe)
everyone is going to be partially biased to what they have. to my knowledge there hasn't been any direct comparisoin test between all the traction bars.
#7
Re: what are the best traction bars out there right now (flip1199)
custom built traction bar because it cost me $100.
i think that as long as the basic concept of keeping the mounting point of the tie rods on the same plain as the LCA then its all gravy... Full race and Lconn comply...
i think that as long as the basic concept of keeping the mounting point of the tie rods on the same plain as the LCA then its all gravy... Full race and Lconn comply...
Trending Topics
#8
Honda-Tech Member
iTrader: (1)
Join Date: Mar 2003
Location: I drink Seafoam and poo into catch cans, USA
Posts: 3,215
Likes: 0
Received 2 Likes
on
2 Posts
Re: what are the best traction bars out there right now (flip1199)
I bought a set of egay specials!!!
They are exact copies of the full race design, jim fab, whatever.
WAY CHEAPER!!
They have them in chromolly and steel if ya wanna be cheap
I got 350whp daily driven on the bars so they do hold up!!
They are exact copies of the full race design, jim fab, whatever.
WAY CHEAPER!!
They have them in chromolly and steel if ya wanna be cheap
I got 350whp daily driven on the bars so they do hold up!!
#9
Re: what are the best traction bars out there right now (mike1114)
yeah... there is a thread on in the welding/fab section that baiscly demystifies traction bars. There is nothing special about one traction bar over another if the geometry is correct. Well... with the exception of mine bars, which have 5/8" hiems to deal with the monster tourque that i'm putting down from my SOHC. haha... its over kill but its ok.... that just means that i can get away with the cheaper joints.
Thread
Thread Starter
Forum
Replies
Last Post