Well it was the rag guys! I can't believe what it robbed me of!
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2002
Location: USA
Posts: 2,802
Likes: 0
Received 0 Likes
on
0 Posts
Well it was the rag guys! I can't believe what it robbed me of!
Well when I was using the shop rag, I could barely hit 1psi.
I take off the shoprag and use some window screen I hit 9PSI! on a STOCk D16z6 engine. I blew off the JB welds on the IC so I just used JB Kwick and a little Duct take lol. Holds great!
This car HAULS ***. Too bad im using a stock 134,000 mile clutch! I can only use 1/2 (most i used was 57%) throttle and GOOOD LORD! Talk about boost!
SVO T3 60 trim .60/.63
93 octane
DSM 450's
BKR7ES (2 step colder) plugs
Timing retarded 2 degrees
and 35% across the board on the hack!! There's more left in this setup and I can't wait to find it.
Just wanted to let you know how things are going. I'll have a vid up shortly
I take off the shoprag and use some window screen I hit 9PSI! on a STOCk D16z6 engine. I blew off the JB welds on the IC so I just used JB Kwick and a little Duct take lol. Holds great!
This car HAULS ***. Too bad im using a stock 134,000 mile clutch! I can only use 1/2 (most i used was 57%) throttle and GOOOD LORD! Talk about boost!
SVO T3 60 trim .60/.63
93 octane
DSM 450's
BKR7ES (2 step colder) plugs
Timing retarded 2 degrees
and 35% across the board on the hack!! There's more left in this setup and I can't wait to find it.
Just wanted to let you know how things are going. I'll have a vid up shortly
#4
Honda-Tech Member
Thread Starter
Join Date: Nov 2002
Location: USA
Posts: 2,802
Likes: 0
Received 0 Likes
on
0 Posts
Re: Well it was the rag guys! I can't believe what it robbed me of! (RenoRacing)
It sure does! I can't wait to install my Stage 3 clutch and lightweight flywheel so i can really pound on the thing
#6
What is this crap?
Re: (nevin)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nevin »</TD></TR><TR><TD CLASS="quote">your talking about the turbo filter right?</TD></TR></TABLE>
yup. let this be a lesson to all the freaks that think their **** flows better than a standard air filter.
yup. let this be a lesson to all the freaks that think their **** flows better than a standard air filter.
#7
Honda-Tech Member
Join Date: Jan 2003
Location: PACNW
Posts: 452
Likes: 0
Received 0 Likes
on
0 Posts
Re: (falconGSR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by falconGSR »</TD></TR><TR><TD CLASS="quote">
yup. let this be a lesson to all the freaks that think their **** flows better than a standard air filter.
</TD></TR></TABLE>
Seriously hehe.... some people don't understand that 120in^2+ of filter element will always outflow 12in^2 or less of any household fabric
yup. let this be a lesson to all the freaks that think their **** flows better than a standard air filter.
</TD></TR></TABLE>
Seriously hehe.... some people don't understand that 120in^2+ of filter element will always outflow 12in^2 or less of any household fabric
Trending Topics
#8
Honda-Tech Member
Join Date: Aug 2002
Location: Hiboosta, IL, USA
Posts: 2,959
Likes: 0
Received 0 Likes
on
0 Posts
Re: (hpfsi)
I saw the same gain, I was using disposable paint maks and changing them out every couple days. I could still hit full boost but when I put on a full sized AEM filter I felt a significant gain. However now my Azenis can't hold the power Time to go to BFGs.
#10
Honda-Tech Member
Join Date: Jan 2002
Location: Raleigh, NC
Posts: 15,334
Likes: 0
Received 0 Likes
on
0 Posts
Re: Well it was the rag guys! I can't believe what it robbed me of! (racinskittle)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by racinskittle »</TD></TR><TR><TD CLASS="quote">It sure does! I can't wait to install my Stage 3 clutch and lightweight flywheel so i can really pound on the thing </TD></TR></TABLE>
How about you just get a new air filter instead of all of this stuff and actually protect your motor and have a decent air filter!!
How about you just get a new air filter instead of all of this stuff and actually protect your motor and have a decent air filter!!
#11
Re: Well it was the rag guys! I can't believe what it robbed me of! (Ricey McRicerton)
Yes get a real filter and you will feel yet another gain and save your turbo and engine. Why isn't the clutch already in! That would be so frusturating to have the clutch but drive a car with a slipping stock one.
#12
Honda-Tech Member
Thread Starter
Join Date: Nov 2002
Location: USA
Posts: 2,802
Likes: 0
Received 0 Likes
on
0 Posts
Re: Well it was the rag guys! I can't believe what it robbed me of! (Bailhatch)
Thanks guys, the clutch would be in but i live 3hrs away from home and have only had time to work on this kit on the weekends. So hopefully i can put in a clutch and flywheel next weekend.
BUT I just had a ******* disasterous day with the RETARDS who made my ******* downpipe....Im starting a new topic cuz i've got some issues with these guys
BUT I just had a ******* disasterous day with the RETARDS who made my ******* downpipe....Im starting a new topic cuz i've got some issues with these guys
Thread
Thread Starter
Forum
Replies
Last Post
Accord94DX
Forced Induction
5
08-22-2002 09:32 AM