VID: Ran my Turbo 99' Si tonight....160K stock engine, 10psi... 7.6@89mph in 1/8!
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Mar 2003
Location: Louisville, KY, USA
Posts: 3,662
Likes: 0
Received 0 Likes
on
0 Posts
VID: Ran my Turbo 99' Si tonight....160K stock engine, 10psi... 7.6@89mph in 1/8!
Full interior with powersteering. A/C is the only thing removed.
Battled a slipping clutch all night and my slicks are 22s and I feel are way too small for my power levels
Car:
99 Civic Si 160,673miles
ALL stock engine
2.5inch Alum IC pipe from Autolab
Garret core IC
TiaL 44mm gate
Tial 50mm BOV
RC 1000cc injectors (for whenever I build the motor)
Neukin VV manifold
t3-t04e 60 trim turbo
3 inch DP.Dump
Ran a few more 7.7-7.9 sec passes throughout the night after that 7.6 run.
I shut anti-lag off as it made me spin too much and used straight 2-step and did way better 60s after that.
New clutch and bigger slicks to come soon i hope!
comment if u feel to!
Video: http://www.geektuned.com./Medi...5.wmv
Battled a slipping clutch all night and my slicks are 22s and I feel are way too small for my power levels
Car:
99 Civic Si 160,673miles
ALL stock engine
2.5inch Alum IC pipe from Autolab
Garret core IC
TiaL 44mm gate
Tial 50mm BOV
RC 1000cc injectors (for whenever I build the motor)
Neukin VV manifold
t3-t04e 60 trim turbo
3 inch DP.Dump
Ran a few more 7.7-7.9 sec passes throughout the night after that 7.6 run.
I shut anti-lag off as it made me spin too much and used straight 2-step and did way better 60s after that.
New clutch and bigger slicks to come soon i hope!
comment if u feel to!
Video: http://www.geektuned.com./Medi...5.wmv
#2
Honda-Tech Member
Join Date: Nov 2005
Location: Brighton, Mi
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
Re: VID: Ran my Turbo 99' Si tonight....160K stock engine, 10psi... 7.6@89mph in 1/8! (wade)
god damn man! thats some awesome 60ft's, 330's and 1/8!!
im trapping about 90-91 mph, yet only getting 8.3's in the 1/8. and high 1.9's low 2.0's. and im on 225 bfg's.
that some low 12's! just make sure to get some taller slicks cause you will have to shift to 5th on the 22's before the end of the quarter.
good luck and hot car
im trapping about 90-91 mph, yet only getting 8.3's in the 1/8. and high 1.9's low 2.0's. and im on 225 bfg's.
that some low 12's! just make sure to get some taller slicks cause you will have to shift to 5th on the 22's before the end of the quarter.
good luck and hot car
#3
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Mar 2003
Location: Louisville, KY, USA
Posts: 3,662
Likes: 0
Received 0 Likes
on
0 Posts
Re: VID: Ran my Turbo 99' Si tonight....160K stock engine, 10psi... 7.6@89mph in 1/8! (bdavis)
yea i used my friends 22s off a NA honda
when i get more extra cash, new clutch and 24 inch slicks
when i get more extra cash, new clutch and 24 inch slicks
#4
12 Years Strong
Join Date: Apr 2003
Location: South Carolina
Posts: 6,079
Likes: 0
Received 0 Likes
on
0 Posts
Re: VID: Ran my Turbo 99' Si tonight....160K stock engine, 10psi... 7.6@89mph in 1/8! (wade)
NICE! 60fts look awesome! I'll bet it was leaving HARD
EDIT: Watched video, lol Nice car man
EDIT: Watched video, lol Nice car man
#5
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Mar 2003
Location: Louisville, KY, USA
Posts: 3,662
Likes: 0
Received 0 Likes
on
0 Posts
Re: VID: Ran my Turbo 99' Si tonight....160K stock engine, 10psi... 7.6@89mph in 1/8! (HybridHatch88
did u watch the vid? hell yea it left hard on that pass!
Trending Topics
#10
official honda whore
Join Date: Nov 2002
Location: not tellin you where, pa, usa
Posts: 8,454
Likes: 0
Received 0 Likes
on
0 Posts
Re: (JoJOzzz...)
some sick 60' times, man i wish i coulda pulled those off when i had my teg i woulda been hittin low 12s
sick Si especially for the miles
sick Si especially for the miles
#11
Honda-Tech Member
Join Date: Feb 2003
Location: Newcastle, DE, us
Posts: 1,946
Likes: 0
Received 0 Likes
on
0 Posts
Re: (JoJOzzz...)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JoJOzzz... »</TD></TR><TR><TD CLASS="quote">1.68 on 22's...
thats real good, almost too good</TD></TR></TABLE>
What kind of suspension u runnin???? Thats a bad *** 60ft.. I got an ls swapped eg hatch with the same turbo....One night at the track I was just "joking " around with my friends and told them I was gonna pulla 1.6 60ft out a 100% bone stock suspension with an open diff and slicks only...Well didnt pull a 1.6, but did pull a 1.70 flat!! Never got that 60 back to this day, but amazed some people including myself with completely stock suspension.... So I was a little curious about your setup...
thats real good, almost too good</TD></TR></TABLE>
What kind of suspension u runnin???? Thats a bad *** 60ft.. I got an ls swapped eg hatch with the same turbo....One night at the track I was just "joking " around with my friends and told them I was gonna pulla 1.6 60ft out a 100% bone stock suspension with an open diff and slicks only...Well didnt pull a 1.6, but did pull a 1.70 flat!! Never got that 60 back to this day, but amazed some people including myself with completely stock suspension.... So I was a little curious about your setup...
#12
Re: (99lspwr)
Damn that 60' time makes me mad. I recently went to the track on my hatch and ran a 7.85 at 96mph but dont have a clue what my 60' were because they did not pass out timeslips that day I was also using some old 22x8x15" slicks but still spinning them on launch. I wander if your slipping clutch helped you get those 60' times? Im running a pretty simple suspension setup also just some cheap springs and some KYB shocks. I could probably lower my ET if I were to stiffen up my rear suspension some.
#13
Honda-Tech Member
Join Date: Mar 2002
Location: 106 and Park
Posts: 6,295
Likes: 0
Received 0 Likes
on
0 Posts
Re: VID: Ran my Turbo 99' Si tonight....160K stock engine, 10psi... 7.6@89mph in 1/8! (wade)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wade »</TD></TR><TR><TD CLASS="quote">what do you mean by that espanol?</TD></TR></TABLE>
I mean, i'm seeing more post about turbo SI's , I thought all of them had gotten stolen
I mean, i'm seeing more post about turbo SI's , I thought all of them had gotten stolen
#14
Honda-Tech Member
Join Date: Aug 2005
Location: I miss the east coast, TX, USA
Posts: 2,695
Likes: 0
Received 1 Like
on
1 Post
Tottaly impressive man, I trap the same as you but you straight killed me in et. I can't seem to figure out how to 60 a fwd car well yet. my best is a 1.98.
Congrats man, that is one hell of a pass.
Congrats man, that is one hell of a pass.
#15
Honda-Tech Member
Join Date: Apr 2005
Location: central, Fl, US
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
Re: VID: Ran my Turbo 99' Si tonight....160K stock engine, 10psi... 7.6@89mph in 1/8! (wade)
what did you launch at, what is your suspension, and how much HP you pushing there? Nice whip, good driving. NICE
#17
Honda-Tech Member
Join Date: Aug 2005
Location: Hueytown, Al, United states
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
Re: VID: Ran my Turbo 99' Si tonight....160K stock engine, 10psi... 7.6@89mph in 1/8! (Buzzbomb)
i think that is the most impressive 1/8 i have ever seen out of a civic
Good Job!! give us some hints on your secret
Good Job!! give us some hints on your secret
#19
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Mar 2003
Location: Louisville, KY, USA
Posts: 3,662
Likes: 0
Received 0 Likes
on
0 Posts
Re: (undercoverdc2)
full omni suspension. the firmer of the two they make.
i dont slip the clutch, pretty much let it go, LOL
never dynod the car, i am broke after this car. makes 290-300whp i'd guess.
thanks you all
i dont slip the clutch, pretty much let it go, LOL
never dynod the car, i am broke after this car. makes 290-300whp i'd guess.
thanks you all
#25
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Mar 2003
Location: Louisville, KY, USA
Posts: 3,662
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Tactic$)
not anymore.
gonna get a built block this fall. well not sleeved, but rod.piston block. i want 430ish.
if i can get 7.6 runs for 290-300whp. 400+ will be good daily
gonna get a built block this fall. well not sleeved, but rod.piston block. i want 430ish.
if i can get 7.6 runs for 290-300whp. 400+ will be good daily