turboing b18b1 stock internals
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2004
Location: AL, USA
Posts: 386
Likes: 0
Received 0 Likes
on
0 Posts
turboing b18b1 stock internals
Hey I have a 92 Hatch with a b18b1 and GSR transmission
So far the best time is a 9.0 in the 1/8 mile (fully gutted) and i want to run a turbo setup, but this is my first honda (but i have built 4g63's before) And i was wondering what kind of turbo to look for in a t3/t4 that wont blow my motor, and how much hp will the stock internals take safely? im guessing anything 10psi or lower on about a 57 trim will be ok correct? ill also be running a greddy emanage, injectors, yadda yadda all supporting mods
So far the best time is a 9.0 in the 1/8 mile (fully gutted) and i want to run a turbo setup, but this is my first honda (but i have built 4g63's before) And i was wondering what kind of turbo to look for in a t3/t4 that wont blow my motor, and how much hp will the stock internals take safely? im guessing anything 10psi or lower on about a 57 trim will be ok correct? ill also be running a greddy emanage, injectors, yadda yadda all supporting mods
#2
Junior Member
Join Date: Jul 2006
Location: Nowhere, USA
Posts: 810
Likes: 0
Received 0 Likes
on
0 Posts
300whp seems to be the standard. If you want to get there using a t25 boosting 30psi or a t04 boosting 5psi thats your call. PSI dosent really matter. Just make sure you are running a good EM system. (crome, uber, hondata...ect ect)
Thread
Thread Starter
Forum
Replies
Last Post
Lawbags
Forced Induction
15
10-06-2017 05:15 AM