turbo sizing for 350whp d16
08-01-2012, 12:34 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2011
Location: Clemson, Sc
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
turbo sizing for 350whp d16
I got a 92 hatch with an a6 in it that had a bearing going out. 
A week later, the timing belt snapped. Now I decided to build my z6 block for boost. Running rcautoworks 9.1:1 cr 75.5mm pistons/rods combo with a worked head n camshaft. My goal is 350whp, and I need assistance programs picking out a turbo for my goals. Its somewhat of a budget build, but I don't want eBay junk. I've searched Nd read through n through countless turbo d builds but still not sure what what turbo to run. Thanks in advance
A week later, the timing belt snapped. Now I decided to build my z6 block for boost. Running rcautoworks 9.1:1 cr 75.5mm pistons/rods combo with a worked head n camshaft. My goal is 350whp, and I need assistance programs picking out a turbo for my goals. Its somewhat of a budget build, but I don't want eBay junk. I've searched Nd read through n through countless turbo d builds but still not sure what what turbo to run. Thanks in advance
08-01-2012, 08:42 PM
#3
Re: turbo sizing for 350whp d16
I would recommend a Turbonetics 5757 which would be very responsive on a small displacement engine with some head room to grow if you choice to turn up the boost later down the line with capability up to around 500whp. If you need assistance with proper turbo selection shoot me a pm.
Thread
Thread Starter
Forum
Replies
Last Post