Turbo size suggestion for new setup
#1
Honda-Tech Member
Thread Starter
Turbo size suggestion for new setup
My previous setup was the revhard 2c kit with the garrett t3/t4 turbo. I made 215whp at 10psi. With my new setup i want to make around 250whp, should i go with the same turbo or would a t3 like a super 60 be a better setup. I know i have seen some guys post up smaller turbos with about the same hp i'm looking for that why i was wondering if i should just get a t3.
#3
Honda-Tech Member
Join Date: Jun 2001
Location: Northern, VA
Posts: 7,261
Likes: 0
Received 0 Likes
on
0 Posts
Re: Turbo size suggestion for new setup (rocket256)
If your looking for more torque down below and quicker spoolup, get the T3 but you'll have to run more boost versus the T3/T4 to obtain your goal level.
#6
Honda-Tech Member
Thread Starter
boost is going to stay just below 1 bar. I read in honda tuning book that they made more hp with a t3 on a b16 than with a t3/t4 with the same boost level and setup.
#7
Honda-Tech Member
Thread Starter
btw, the block is built except no sleeves yet, and i'm going with AEM EMS this time around, and this will be my second car, so it wont be daily driven. It'll be purelly for fun and track use
Thread
Thread Starter
Forum
Replies
Last Post
hondaimport99
Forced Induction
13
07-12-2005 02:45 PM