Turbo newbie: Need help on junkyard turbo setup....
#1
Guest
Posts: n/a
Turbo newbie: Need help on junkyard turbo setup....
Hey guys, here is some background on my car. I drive a 1994 Honda civic coupe SI(D16z6) motor. The car has already 249,XXX KM and I have found a good deal on a junkyard turbo setup which I am interested in.
This is what the junkyard turbo setup the guy is selling consists of:
TD05H- off of a 1991 Talon
Custom down-pipe and Manifold
MR2 B.O.V. and MR2 Inter-cooler
Oil Cooler and hoses
*Needs piping to and from inter-cooler and taped oil pan.
Now, I still need to replace my water pump but what else should/do I need to do to my motor to prepare me for boost???
what else do I need to complete the turbo setup??
please help
thank you
bart
This is what the junkyard turbo setup the guy is selling consists of:
TD05H- off of a 1991 Talon
Custom down-pipe and Manifold
MR2 B.O.V. and MR2 Inter-cooler
Oil Cooler and hoses
*Needs piping to and from inter-cooler and taped oil pan.
Now, I still need to replace my water pump but what else should/do I need to do to my motor to prepare me for boost???
what else do I need to complete the turbo setup??
please help
thank you
bart
#4
Join Date: Jan 2004
Location: Ken Jennings is a Pimp
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
Re: Turbo newbie: Need help on junkyard turbo setup.... (EJ1_519)
safc and some dsm 450's
not sure but in my nissan i was going to retard the timing for each psi of boost
not sure but in my nissan i was going to retard the timing for each psi of boost
Thread
Thread Starter
Forum
Replies
Last Post
Osokwik
Forced Induction
16
04-08-2005 09:12 PM