Turbo Kit Fabrication and Tuning Video
#1
Junior Member
Thread Starter
Join Date: Jan 2006
Location: Arlington, Texas, USA
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Turbo Kit Fabrication and Tuning Video
Hi guys!
I just wanted to share with everyone!!!
The bottom end is stock with over 150,000 miles on it. So no High boost just yet. A fairly small turbo at 8.5 psi, Hondata S300. The car made 230 HP on a Dyno Dynamics Dyno that reads lower than what most of you guys are used to. On a Dyno Jet it will put out in the neighborhood of 265 HP to 275 HP.
The video is the second video on the page, <U>please be patient as the video is fairly large and takes a long time to download.</U>
Paul's 1998 Turbocharged Prelude
http://www.macellarosperforman...y.php
enjoy
Chris Macellaro
I just wanted to share with everyone!!!
The bottom end is stock with over 150,000 miles on it. So no High boost just yet. A fairly small turbo at 8.5 psi, Hondata S300. The car made 230 HP on a Dyno Dynamics Dyno that reads lower than what most of you guys are used to. On a Dyno Jet it will put out in the neighborhood of 265 HP to 275 HP.
The video is the second video on the page, <U>please be patient as the video is fairly large and takes a long time to download.</U>
Paul's 1998 Turbocharged Prelude
http://www.macellarosperforman...y.php
enjoy
Chris Macellaro
#4
Junior Member
Join Date: Jul 2006
Location: Central Texas
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
Re: Turbo Kit Fabrication and Tuning Video (macsperformance)
Direct link:
http://www.macellarosperforman...t.wmv
http://www.macellarosperforman...t.wmv
#5
Junior Member
Thread Starter
Join Date: Jan 2006
Location: Arlington, Texas, USA
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Re: Turbo Kit Fabrication and Tuning Video (HybridKOOP)
Hello Louis!
Nice to see you on this forum, good luck with your project!!!!
Chris Macellaro
Nice to see you on this forum, good luck with your project!!!!
Chris Macellaro
Trending Topics
#8
Honda-Tech Member
Join Date: Mar 2005
Location: B0ST0N, MA
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
Re: Turbo Kit Fabrication and Tuning Video (macsperformance)
whats up Chris!!! Jason from boston. (chris taught me at EFI101 also)
good to see your on H-T.
i'm going to download that vid when i get home tonight...hope its good!
have a good one man
good to see your on H-T.
i'm going to download that vid when i get home tonight...hope its good!
have a good one man
Thread
Thread Starter
Forum
Replies
Last Post
nyce1
Drag Racing
22
04-24-2008 09:45 AM
nyce1
Drag Racing
22
04-09-2006 07:12 AM