turbo experts need your help.........w/turbo setup?
#1
Honda-Tech Member
Thread Starter
Join Date: May 2002
Location: Virginia, usa
Posts: 962
Likes: 0
Received 0 Likes
on
0 Posts
turbo experts need your help.........w/turbo setup?
ok here is the setup i'm doing on my ls:
iron sleeves(plus the block is 1976cc)
je 85mm pistons
crower rods
balanced and blue printed crank
new bearings
jg redline series head/ but with crower 403's and valve springs and retainers.
edelbrock victor x intake mani
now after all this i'm gettin a rev hard stage 3 kit. but i comes with the option of any T4 series turbos. which one should i get if its daily driven and taken to the track on weekends? what management to i have to get, i was thinking about getting the hks f-con s cause there are 4 different setting you can have saved. well
iron sleeves(plus the block is 1976cc)
je 85mm pistons
crower rods
balanced and blue printed crank
new bearings
jg redline series head/ but with crower 403's and valve springs and retainers.
edelbrock victor x intake mani
now after all this i'm gettin a rev hard stage 3 kit. but i comes with the option of any T4 series turbos. which one should i get if its daily driven and taken to the track on weekends? what management to i have to get, i was thinking about getting the hks f-con s cause there are 4 different setting you can have saved. well
Thread
Thread Starter
Forum
Replies
Last Post
ExplicitSpeed
Forced Induction
1
03-08-2004 10:59 PM