turbo d16y8 need help with DSM 450s please
#1
turbo d16y8 need help with DSM 450s please
My friend just got his turbo installed and the car runs very rich with the AFC set at
-50 all the way.I know that a lot of people use the DSM injectors but couldn't figure out the problem with his setup. your help is appreciated a lot guys.
The setup:
d16y8 stock internals
T3 @ 5 psi,external wastegate, intercooler, 2" downpipe and exhaust
the hack ( AFC+resistor+DSM 450s)
-50 all the way.I know that a lot of people use the DSM injectors but couldn't figure out the problem with his setup. your help is appreciated a lot guys.
The setup:
d16y8 stock internals
T3 @ 5 psi,external wastegate, intercooler, 2" downpipe and exhaust
the hack ( AFC+resistor+DSM 450s)
#4
Honda-Tech Member
Join Date: Dec 2003
Location: DFW, TX
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
Re: turbo d16y8 need help with DSM 450s please (alghafat424)
With a FPR you can turn the fuel down so the car doesn't run so rich with the afc. We've been using them for a while until we went to Turboedit on our cars.
#5
how do you know your running rich? do you have a wideband hooked up?
anyway, an adjustable fpr would prolly help out.
on a side note, your buddy can sell his afc and run uberdata for free. use the money from the afc to get tuned.
anyway, an adjustable fpr would prolly help out.
on a side note, your buddy can sell his afc and run uberdata for free. use the money from the afc to get tuned.
Thread
Thread Starter
Forum
Replies
Last Post
illestrolla247
Forced Induction
7
07-30-2004 07:31 AM
Johnyquest
Forced Induction
9
12-29-2002 03:26 PM