turbo charging my b16a
#1
Thread Starter
Join Date: Aug 2004
Location: Ottawa, ont., Canada
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
turbo charging my b16a
I need some advice on what parts i should get to complete my turbo set-up for my b16a. My buddy wants to sell me his t 25 turbo from his talon and his 450 cc injectors. What would be the best parts (bov, intercooler..etc) to get to complete this set-up??? Is it worth doing??
#2
Who is Mr Robot?
iTrader: (2)
Join Date: Jul 2004
Location: ATL - Where the Pimps and Players dwell
Posts: 21,474
Likes: 0
Received 10 Likes
on
10 Posts
Re: turbo charging my b16a (B16aswap)
t-25 on a b16?? haha, um no. that turbo is way too small and inefficient for use on a b16. it will make hella good low end, but power in the higher rev range will be non-existent
#5
Who is Mr Robot?
iTrader: (2)
Join Date: Jul 2004
Location: ATL - Where the Pimps and Players dwell
Posts: 21,474
Likes: 0
Received 10 Likes
on
10 Posts
Re: turbo charging my b16a (TheShodan)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TheShodan »</TD></TR><TR><TD CLASS="quote">I agree. I really wouldn't waste time on that T25 he's trying to dump off on you..</TD></TR></TABLE>
well, what are friends for, lol
well, what are friends for, lol
#6
Thread Starter
Join Date: Aug 2004
Location: Ottawa, ont., Canada
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: turbo charging my b16a (B16aswap)
So what kind of set-up are u suggesting? What turbo kist should I look into without having to do alot of mods to my internals, almost keeping them stock???
#7
Honda-Tech Member
Join Date: Apr 2004
Location: pittsurgh, pa, usa
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
Re: turbo charging my b16a (B16aswap)
there are lots of turbos out there.. get on ebay, go to cheapturbos.com
if you dont know too much about turbos take it from me, buy a nice complete setup from greddy. or garret. edelbroke just came out with some preformer X turbo setup... all these are pretty much bolt on and come with everything you need to do it... plus you might spend an extra hundred dollars doing this, but you'll know you have all the right stuff.... trust me..... just keep the boost at a respectable level and you'll be fine
just did a turbo setup myself last summer and i spent about $2200 and wish for the sake of my mental health i would have gotten a complete kit
if you dont know too much about turbos take it from me, buy a nice complete setup from greddy. or garret. edelbroke just came out with some preformer X turbo setup... all these are pretty much bolt on and come with everything you need to do it... plus you might spend an extra hundred dollars doing this, but you'll know you have all the right stuff.... trust me..... just keep the boost at a respectable level and you'll be fine
just did a turbo setup myself last summer and i spent about $2200 and wish for the sake of my mental health i would have gotten a complete kit
Thread
Thread Starter
Forum
Replies
Last Post