Trouble diagnosing babbitt looking material in oil
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2002
Location: Altoona, PA, USA
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
Trouble diagnosing babbitt looking material in oil
I have what sounds like a pretty decent rod knock going on in my motor, along with signs of metal dusting all through the oil.
It looked to me just like babbitt metal from the bearings, although, I took the main girdle off to find that the bearings are only a little flattened showing tiny bit of copper around the oil channels. The rods look perfect!!!
At this point im thinking either valve train, piston slap, or bad wrist pin. Any thoughts?????
At this point I think I am going to put new mains in and reassemble it. Then pull the valve train apart and examine that.
It looked to me just like babbitt metal from the bearings, although, I took the main girdle off to find that the bearings are only a little flattened showing tiny bit of copper around the oil channels. The rods look perfect!!!
At this point im thinking either valve train, piston slap, or bad wrist pin. Any thoughts?????
At this point I think I am going to put new mains in and reassemble it. Then pull the valve train apart and examine that.
Thread
Thread Starter
Forum
Replies
Last Post
99Nitestalker
Honda Prelude
2
07-14-2007 06:00 PM