BlackBeastEK

After cracking my ringlands on my stock long block, i decided to go all out.

here is my new setup:

Benson sleeved B16a block bored out to 81.5mm ( thanx alot to Mike @ Laskey Racing )
CP pistons 9.0:1
Manley rods I-Beam Turbo Tuff Full-Race Motorsports edition
Full ACL bearings
ARP rod,main and head stud
Micropolished and Balanced the crank
Supertech valve,springs and retainers
Garrett GT3076r with 82.AR exhaust housing
Hondata s300
Neukin topmount manifold with 3inch downpipe
44mm Tial wastegate
Precision 1000cc injectors
enough said lol theres more but.....




Modified by elementb16a at 9:01 PM 10/15/2007

m R g S r

i thought that was my old motor until i saw pics of you building it....i had earl build me that EXACT motor year or two back sold it before i even took it off the engine stand thou


good luck with it

NJslvrtypes

nice build, props on the diy. only way to go...

mikes a great guy too, helped a lot w/ my current setup

BlackBeastEK

haha thanx bud sucks that you sold it before you could even try it

BlackBeastEK

yep your right diy is the way to go thanx man

nolicense526

just curious - about how mcuh money do you have into the bottom end of the motor? looking to build my bottom end for some higher boost levels.

BlackBeastEK

around 3300$ just on the bottom end thats a quick calculation, i havent calculate yet lol

tony413

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by elementb16a &raquo;</TD></TR><TR><TD CLASS="quote">around 3300$ just on the bottom end thats a quick calculation, i havent calculate yet lol</TD></TR></TABLE>

sound about right practically normal for a good piece of mind

Redcoupe

Similar setup to what I want to do.

Minus the sleeving and the topmount.

Noone ever does a setup similar to mine with ac/ps.

tony413

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Redcoupe &raquo;</TD></TR><TR><TD CLASS="quote">Similar setup to what I want to do.

Minus the sleeving and the topmount.

Noone ever does a setup similar to mine with ac/ps.

</TD></TR></TABLE>

man up and get those arm muscles working PS is for the girly man as far as AC goes damn im gonna miss it in florida 95* weather

BlackBeastEK

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tony413 &raquo;</TD></TR><TR><TD CLASS="quote">

man up and get those arm muscles working PS is for the girly man as far as AC goes damn im gonna miss it in florida 95* weather </TD></TR></TABLE>

ps = lol

thanx for the comments guys

Mikey3000

Looks great.

Autoworks

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mikey3000 &raquo;</TD></TR><TR><TD CLASS="quote">Looks great.</TD></TR></TABLE>
on the DIY

u n v kenny

Looks good.

Redcoupe

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tony413 &raquo;</TD></TR><TR><TD CLASS="quote">

man up and get those arm muscles working PS is for the girly man as far as AC goes damn im gonna miss it in florida 95* weather </TD></TR></TABLE><TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by elementb16a &raquo;</TD></TR><TR><TD CLASS="quote">

ps = lol

thanx for the comments guys </TD></TR></TABLE>

My old car was a 92 Cx, I'm quiet fine with no powersteering, but since the car came with it, I'm keeping it.

Can't wait to see it runnin and tuned.

ShawnR

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Redcoupe &raquo;</TD></TR><TR><TD CLASS="quote">

My old car was a 92 Cx, I'm quiet fine with no powersteering, but since the car came with it, I'm keeping it.

Can't wait to see it runnin and tuned. </TD></TR></TABLE>

holy crap i never see this guy post before

btw setup looks good man post some numbers up when u get done...

90dxhmt

iTrader: (1)

Wow looking great so far Did you get nailed much for customs on the sleeved block I was about to order one and im in Canada as well.

HybridKOOP

Good work! I hope you measured clearances!

BlackBeastEK

actualy i paid 163$CAD to get my block and crank shipped out to Laskey, then no customs at the door from fedex on its way back i was prety happy lol cauz i thought they were going to kill me at the door also.

BlackBeastEK

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HybridKOOP &raquo;</TD></TR><TR><TD CLASS="quote">Good work! I hope you measured clearances!</TD></TR></TABLE>

Thanx louis wow you have one sick as build also lol keep it up ive been watching it since you started.


Modified by elementb16a at 5:32 PM 10/4/2007

SuperTeg95

FYI...those rods are I-beam, not H. DId you measure bearing clearances?

BlackBeastEK

well gonna have some pics of the head done tomorow

-head got resurfaced
-valve job
-Hone my cams journals
- New valve guides
- Supertech nitride coated valves, titanium retainers and springs ( Thanx again to Mike Laskey for giving me a awesome deal on those!!! )

Now ive been thinking about new cams lately, but havent even looked into it yet, so if you guys have some good inputs let me know

BlackBeastEK

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SuperTeg95 &raquo;</TD></TR><TR><TD CLASS="quote">FYI...those rods are I-beam, not H. DId you measure bearing clearances and file fit your rings?</TD></TR></TABLE>

my bad lol thanx, i was probably thinking of my friends eagle rods when i wrote it down

BlackBeastEK

Well the head is finally done

will be putting the head on the block prety soon!!! more pics comin up

next thing that im attacking is the tranny




Modified by elementb16a at 9:02 PM 10/15/2007

dpetro1

awesome setup. pretty much what i want to do with my gsr dunno if im gonna go with the baller topmount though. im surprised nobody has given you **** for not going 84mm. any particular reason?