Thinking about turbo'N my D15b somebody help me with this set up??
#1
Honda-Tech Member
Thread Starter
Thinking about turbo'N my D15b somebody help me with this set up??
I am thinking about turbo'N My D-Series jdm d15b right now its done stock I was doing some math and if i build a d series right it would make some serious power with a fine tune. Well the thing is I know everyone including me on Honda-Tech hates SSAC with a passion and I got more common sence than that. the thing is I am going to piece my turbo kit out when I get some money. like I want to buy some stuff off of ebay for now like a cast iron turbo mantifold and rc injectors and the walbro fuel pump. the thing is I have never had my car turbod before and I have always been wanting it pretty bad. I rode in my friends h22 turbo and holy **** that thing was gettin down. So what are your guys set ups and what do you guys run and what areyour numbers. thanks I know this is a anoyying thread but I am a newbie at this thanks.
#3
Member
Join Date: Nov 2002
Location: Richmond, VA, USA
Posts: 1,695
Likes: 0
Received 0 Likes
on
0 Posts
Re: Thinking about turbo'N my D15b somebody help me with this set up?? (john d)
My car likes "gettin' down"...
Accord single cam, .7 bar, EVOIII 16g, 2.5" turboback, Crome tuned, 450cc / 255lph.
Accord single cam, .7 bar, EVOIII 16g, 2.5" turboback, Crome tuned, 450cc / 255lph.
#4
Honda-Tech Member
Re: Thinking about turbo'N my D15b somebody help me with this set up?? (john d)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by john d »</TD></TR><TR><TD CLASS="quote">turbo'N</TD></TR></TABLE>
yes...could have spellled out "turboing" correctly with the same keystroke basically.
Here...
https://honda-tech.com/zerothread?id=1643764
Turbo setups vary 1,009,849,479,538,749 different ways...but basic setups are fairly easy ( http://www.go-autoworks.com )<--gallery
yes...could have spellled out "turboing" correctly with the same keystroke basically.
Here...
https://honda-tech.com/zerothread?id=1643764
Turbo setups vary 1,009,849,479,538,749 different ways...but basic setups are fairly easy ( http://www.go-autoworks.com )<--gallery
Thread
Thread Starter
Forum
Replies
Last Post
Xemu
Forced Induction
3
02-23-2007 09:38 AM