Tearing apart a t3?
#1
Member
Thread Starter
Tearing apart a t3?
If anyone has directions to taking apart a t3 turbo that be awesome...because the one we have we cant get the bolts out because they are captured between the catridge and exhuast housing....thanks
#3
Honda-Tech Member
Re: Tearing apart a t3? (drumking15)
PB Blaster and/or a torch. You do not need to back the bolt completely out if one is trapped. Just get it loose enough to allow you to rotate the center section enough to get it completely out.
Sonny
Sonny
#5
Honda-Tech Member
Re: Tearing apart a t3? (drumking15)
yea i ran into that problem too when i tried taking it apart....what u do is rotate the exhaust housing so that the bolt head is not goin to touch the oil in/outlet flange. thats it
#6
Member
Thread Starter
Re: Tearing apart a t3? (00b18b)
ya, i had an extra turbo kickin around os i took a huge *** hammer to it and figured out it rotates...thanks for the help!
#7
Honda-Tech Member
Join Date: Feb 2003
Location: Duncannon, PA
Posts: 794
Likes: 0
Received 0 Likes
on
0 Posts
Re: Tearing apart a t3? (drumking15)
loosin all the bolts so you can turn the cartridge, then take out the ones that are free from being blocked and keep turning the cartridge til you get all of them out...I know it's a pain...just rebuilt one this weekend...all bead blasted free of carbon and new internals...its for sale too...so if anyone needs a T3..hit me up...asking $200...yeah I know that it belongs in the classifieds....blah blah...but since t3's were on the subject I figured Id mention it
Thread
Thread Starter
Forum
Replies
Last Post