BigMoneyP

there are 2 hair line cracks on the picture below circled in red.. will this be a problem? i'm using an external wastegate and didn't realize the cracks till now. pls chime in..

rioninja

Thats very common with older turbos. As long as the crack doest reach the casting around the turbine wheel, you will be fine to use it like that.

BigMoneyP

thanks a lot!!

Bailhatch

yup it's fine. run it

BigMoneyP

i feel better now, was a little worried when i saw it. thx!!

nerdsports

if the cracks are around the wastegate hole, then running an internal wastegate might have been a problem.

DRIVENRacing

might creep a little... nothing you cant handle

BigMoneyP

anyway to fix it other than replacing the whole thing?

B16Drag

sell it to me! hahha weld it.

redzcstandardhatch

i've even ran a turbo where the crack extended to around the compressor wheel. i just smoothed it out w/ a die grinder and it has been fine for a LONG time

nickromeo

i bought a rebuild turbo and there was no crack there.

when i removed my dp flange that was just sitting on it to weld my dp up there where those cracks.

my old t3 also had cracks like that!

lol.

i went to a local turbo guy one time to ask him about em and he just looked at me nd said "YAH THEY ALL HAVE THAT"

dont worry about it!

BigMoneyP

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B16Drag &raquo;</TD></TR><TR><TD CLASS="quote">sell it to me! hahha weld it.</TD></TR></TABLE>

is welding it possible? my DP flange may not fit right if there are welds in that sections.

crx_of_fury

it'll work just use it. the o2 sensor housing should fit right over the top

racinskittle

I've had 2 T3's. Both have had those cracks.

CRXDrew

my 14b has a lil crack around that area. no biggy.

dornon13

you would grind it flush after welding it....anyways im sure a new housing wouldnt be too expensive off ebay or somewhere if you wanted to go that route

BigMoneyP

coool