T3/TO4B vs T3/TO4E
#1
Junior Member
Thread Starter
Join Date: Mar 2002
Location: Rochester Hills, MI, USA
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
T3/TO4B vs T3/TO4E
What are the power differences between these turbos. I'm building a street car with a revhard cast mani and I want to keep the A/C. I'm looking to get the biggest wheels in the B housing what are my options here? T3/TO4B with a .63 A/R on the hot side and I would like a 60 trim on the compressor side but I don't know if it's available. Anyone out there familiar with this let me know.
Plan is a 84mm GSR with PP head and 15 psi of boost...anyone know the power this setup can make on pump gas??? I'm looking for atleast a 120 mph at the track.
Plan is a 84mm GSR with PP head and 15 psi of boost...anyone know the power this setup can make on pump gas??? I'm looking for atleast a 120 mph at the track.
#2
Honda-Tech Member
Re: T3/TO4B vs T3/TO4E (revhardsi)
my turbo builder (turbonetics dealer) built my t3t4B with a massive wheel, they machine the heck out of the B housing and make it fit, and it will move more air than all the E housing (not including big shaft turbos, only small shaft)
Thread
Thread Starter
Forum
Replies
Last Post