rollagti

Hey, i have emaild a little whit fullrace. They say that ther T3-T67 turbo maximum can handle : Low to mid teens (around 400 ish whp).
Can that be right?? I think i have read many places in honda-tech that people doing 24psi whit them and makes 600+ hp. ?!?!?

Kind regards Daniel

12.58@ 116 mph 225-50-15BFG DragRadial. 319hp. @ Corolla GTI @ 2515 pounds

BB6-213

Yeah, that is deffiantley a 600+whp turbo.

BoostedEG6

Yes the turbo is good to about 750whp. Geoff should be able to shead more light on it, since its his creation..

Chris22215

it's definitely a very large t3t4 based turbo

boostedcivicsir

16 psi pump i made 350 very conservatively. i have a tired old b16 spinning mine though, and it is an h.o. so the exh housing is a little larger. but 600 is attainable on that turbo. i am swapping out my exh housing for a t4 with a divided top mount prob not next year but shortly thereafter.

Boostfed

Keep in mind there is teh T3/T67 with the Stage 5 wheel THEN there is the T3/T67 HO with a P trim wheel in a T3 housing that has been machiend to accept teh P trim. The HO also comes with an .82 A/R turbine housing only

B18CXr

394whp (dynojet) with 93 octane here with that kit


see below link:

https://honda-tech.com/zerothread?id=1120721

PM-Performance

on about 14-15 psi conservatively made 440whp on my car. I had the 63 housing with the stage 5 wheel

DaveF

see sig.

Boostfed

stg 5 has a 2.798 inducer and 2.439 exducer
p-trim 2.92 inducer and 2.54 exducer

Thanks to Ant for that info since I replaced my tech spec sheets

therealPROJEKTEG

460/315 19 psi pump gas on an stock h23 vtec. can't wait to put it on my built motor

cuin9sec

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostfed.com &raquo;</TD></TR><TR><TD CLASS="quote">Keep in mind there is teh T3/T67 with the Stage 5 wheel THEN there is the T3/T67 HO with a P trim wheel in a T3 housing that has been machiend to accept teh P trim. The HO also comes with an .82 A/R turbine housing only </TD></TR></TABLE>

same turbo i ran last season....395whp 12psi on stock GSR engine in my hatch. i loved it!!!

B18C1CYA

full-race T3/T67 dual bb H.O. .82 exhaust side P trim dotted line is 13psi on pump gas and solid line is 32.5psi on race gas

Speed Infliction

how much more horsepower does the t3/67 produce over the 60-1?

therealPROJEKTEG

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Speed Infliction &raquo;</TD></TR><TR><TD CLASS="quote">how much more horsepower does the t3/67 produce over the 60-1?</TD></TR></TABLE>

you can find all the specs on full-race.com

B18C1CYA

I would say alot more , the 60-1 is a 60mm wheel and the T3/T67 is a 67mm flows alot more air , also most 60-1 turbos loss there flow after 25 psi wich normal makes around low 500whp

Speed Infliction

what is the difference in lag? rpm wise

STEEZY_EG+DC

i did not know that you could get the t3/t67 ho with the ball bearing someone correct me if i am wrong

Speed Infliction

i don't know either but how many rpms is the lag difference between the 60-1 and the 67?

B18C1CYA

spool was only about 500 rpm later than my sc61 , also recovers alot faster between shifts

vaporboy12

i have the t3/t67 ho dbb before i got the dbb chra i made 556whp at 22psi

bad *** turbo
now i get to see what it does with a t4 housing

Black DC2

made 720 on the same turbo t3-t67

B18C1CYA

yes the turbo will do almost 750 whp , I just need the fule for it , ran out on that 685 whp pull and was still climbing , cant wait to add my other pump , turbo is good for around 36psi I belive

96 GSR-T

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Speed Infliction &raquo;</TD></TR><TR><TD CLASS="quote">i don't know either but how many rpms is the lag difference between the 60-1 and the 67?</TD></TR></TABLE>

Lag is determined by the exhaust wheel, Std wheel on the 60-1 is the Stg3 and optional Stg5. The T3/T67has the Stg5 wheel so spool times are close with the Stg5 60-1 with the same AR's

rollagti

i can see many off your have written Ball Barring.. How did you got it ? I didnt know that you could get the t3-t76 whit bb!!?!?