t3/t4 oil feed fitting
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2005
Location: seattle, wa, usa
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
t3/t4 oil feed fitting
i have a garret t3/t4 that im running and i have absolutely no clue what size the oil feed in the turbo is. usually is 1/8 npt female. i know this. but i think its some metric size. i couldnt find any npt fittings that would work. help please?
#2
Honda-Tech Member
iTrader: (1)
Join Date: Jan 2007
Location: 1
Posts: 489
Likes: 0
Received 0 Likes
on
0 Posts
Re: t3/t4 oil feed fitting (imskatencrzy)
Common sizes are 1.8 npt,7/16 inverted flare or metric 10/12mm.Go to a local hydrualics/hose shop and bring the turbo to try it..You can grab a few metric bolts and chekc them to see if that is the thread then order/buy the right fitting as well.Best bet is just go to a place that sells fittings and figure it out.
#6
Honda-Tech Member
iTrader: (1)
Join Date: Feb 2005
Location: NoVa
Posts: 4,849
Likes: 0
Received 0 Likes
on
0 Posts
Re: t3/t4 oil feed fitting (grappler)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by stealthmode62 »</TD></TR><TR><TD CLASS="quote"> If it's not 1/8npt, it's 1/4. They sell a 1/8npt female to 1/4 male at home depot in the plumbing section. </TD></TR></TABLE>
Correct
Correct
Thread
Thread Starter
Forum
Replies
Last Post
s1ngle
Forced Induction
10
09-14-2006 11:58 PM
88crxhfb16
Forced Induction
13
08-06-2005 11:10 AM
T4sol
Forced Induction
4
04-26-2002 10:31 AM
lucas569
Forced Induction
4
01-14-2002 07:16 PM