t3/t4 B good for 350whp??
06-21-2004, 09:37 AM
#1
Thread Starter
Join Date: Aug 2003
Posts: 494
Likes: 0
Received 0 Likes
on
0 Posts
t3/t4 B good for 350whp??
i have this POS turbonetics turbo
t3/t4 h-3 compressor wheel .63 a/r , stage 3 exhaust
it is supposed to flow 49lb/min
i will be running her at 18psi stock head/ built bottom end h22
750cc injectors and tuned w/ the AEM ems
think 400whp is possible???
t3/t4 h-3 compressor wheel .63 a/r , stage 3 exhaust
it is supposed to flow 49lb/min
i will be running her at 18psi stock head/ built bottom end h22
750cc injectors and tuned w/ the AEM ems
think 400whp is possible???
06-21-2004, 09:42 AM
#3
Junior Member
Join Date: Jan 2004
Location: Not in the United Kingdom.
Posts: 645
Likes: 0
Received 0 Likes
on
0 Posts
Re: t3/t4 B good for 350whp?? (graphic)
You should be able to do it.
I personally would go for a turbo that's a biut bigger, say something that will make 400hp, and turn the boost down a bit. People always seem to run into problems with not making as much power as they like when they are getting up near the max efficiency of their turbo... just my prefrence I guess.
I personally would go for a turbo that's a biut bigger, say something that will make 400hp, and turn the boost down a bit. People always seem to run into problems with not making as much power as they like when they are getting up near the max efficiency of their turbo... just my prefrence I guess.
06-21-2004, 01:10 PM
#4
Thread Starter
Join Date: Aug 2003
Posts: 494
Likes: 0
Received 0 Likes
on
0 Posts
Re: t3/t4 B good for 350whp?? (Mad Cow)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mad Cow »</TD></TR><TR><TD CLASS="quote">You should be able to do it.
I personally would go for a turbo that's a biut bigger, say something that will make 400hp, and turn the boost down a bit. People always seem to run into problems with not making as much power as they like when they are getting up near the max efficiency of their turbo... just my prefrence I guess.</TD></TR></TABLE>
you think 18 psi is near the max efficiency of the h-3 compressor wheel???
I personally would go for a turbo that's a biut bigger, say something that will make 400hp, and turn the boost down a bit. People always seem to run into problems with not making as much power as they like when they are getting up near the max efficiency of their turbo... just my prefrence I guess.</TD></TR></TABLE>
you think 18 psi is near the max efficiency of the h-3 compressor wheel???
Thread
Thread Starter
Forum
Replies
Last Post
booja
Forced Induction
31
01-24-2005 01:04 PM
