T3/T4, 0.48/0.50 A/R, 50 trim: Good match for my little A6?
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2004
Location: VA, USA
Posts: 9,846
Likes: 0
Received 0 Likes
on
0 Posts
T3/T4, 0.48/0.50 A/R, 50 trim: Good match for my little A6?
Gonna be boosting a built A6 next summer. Arias pistons, eagle rods, etc. Would a Garrett T3/T4, 0.48/0.50 A/R, 50 trim be good for my SOHC is my power goals are to hit an easy 300 hp?
I don't wanna be maxing out the turbo, I want a nice, conservative 300 while not having to spool up at 5000.
I don't wanna be maxing out the turbo, I want a nice, conservative 300 while not having to spool up at 5000.
#2
Junior Member
Join Date: Jun 2004
Location: Coquitlam., BC., Can
Posts: 486
Likes: 0
Received 0 Likes
on
0 Posts
Re: T3/T4, 0.48/0.50 A/R, 50 trim: Good match for my little A6? (Tippyman)
It s ounds liek a good match.
I have a .63 AR on my sohc and spool is quite late, although with a built topend and higher revving motor it woudl be essential.
I have a .63 AR on my sohc and spool is quite late, although with a built topend and higher revving motor it woudl be essential.
#5
Honda-Tech Member
Join Date: Jan 2005
Location: b00sting my D16s, SoWis, USA
Posts: 7,015
Likes: 0
Received 7 Likes
on
5 Posts
Re: (Tippyman)
If you're lucky, you'll get 2000 rpm of full boost. The turbo I used would probably be perfect. Its a t3/t04B s-trim (in between t3 60trim and t3/t4 50trim) with a .48 stg1 exhaust. On a stock d16z6 and full 3" dp/exhaust I build boost after 3k and 10psi after 4k. The s-trim can take you to 300whp easy if you're able to tune past 11psi.
#6
Honda-Tech Member
Re: T3/T4, 0.48/0.50 A/R, 50 trim: Good match for my little A6? (Tippyman)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tippyman »</TD></TR><TR><TD CLASS="quote">I'l be shifting at 6500.</TD></TR></TABLE> Stock cam? With a SOHC you can take it into the 7'k
#7
Honda-Tech Member
Thread Starter
Join Date: Jul 2004
Location: VA, USA
Posts: 9,846
Likes: 0
Received 0 Likes
on
0 Posts
Re: T3/T4, 0.48/0.50 A/R, 50 trim: Good match for my little A6? (dr_latino999)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dr_latino999 »</TD></TR><TR><TD CLASS="quote"> Stock cam? With a SOHC you can take it into the 7'k</TD></TR></TABLE>
Well, SOHC ZC cam. I'm having the Head worked over by Endyn. (stock rebuild w/ mild p&p.) When I shift, it drops a little below 5k, so as long as it's in full boost by then I'll be ok.
Well, SOHC ZC cam. I'm having the Head worked over by Endyn. (stock rebuild w/ mild p&p.) When I shift, it drops a little below 5k, so as long as it's in full boost by then I'll be ok.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
spoolin turbo s
Forced Induction
4
10-19-2008 05:18 PM