t3/60-1 vs t3/t04e
#2
Re: t3/60-1 vs t3/t04e (RudeLude)
The 60-1 is the 2nd largest T04B compressor wheel, the largest being the 62-1 still in the T04B family they are larger than any of the T04E wheels 60 trim being the largest
#3
Junior Member
Thread Starter
Join Date: Feb 2003
Location: Grand Cayman, Cayman Islands
Posts: 803
Likes: 0
Received 0 Likes
on
0 Posts
thanks, but i'm talkin bout the actual size of the turbo itself, i'm gunna have some really tight fitment, and i wanna know what would be the best bet for space. is the t3/60-1 larger than the t3/t04e?
#4
Re: (RudeLude)
Well it depends on which one you get , compressor housing standard is a T04S which is a .70 A/R but you can get it by Turbonetics in their 60-1 Hi Fi which is a T04E housing .60 A/R What mani are you using?
#6
Honda-Tech Member
Join Date: Apr 2002
Location: Louisville, KY, US
Posts: 2,126
Likes: 0
Received 0 Likes
on
0 Posts
Re: (RudeLude)
buy my SFP manifold & DP (hopes you have a b20 prelude)
I think the t3/t40e is smaller, but i don't know by how much. try
http://www.turboneticsinc.com
I think the t3/t40e is smaller, but i don't know by how much. try
http://www.turboneticsinc.com
#7
Honda-Tech Member
Join Date: Jan 2003
Location: Baltimore, MD
Posts: 1,626
Likes: 0
Received 0 Likes
on
0 Posts
Re: (seen4ever)
if your space is limited, get a 60-1 HiFi, which is a 60-1 wheel shoved in a lil t04e housing. It is only about 10-20% less efficient i believe, anyone know the exact #s???????
Trending Topics
#8
Honda-Tech Member
Join Date: Mar 2002
Location: sacramento, ca, usa
Posts: 3,818
Likes: 0
Received 0 Likes
on
0 Posts
Re: (RudeLude)
if your using a h22 i don't think its gonna work. Firedrake has that mani and he had to shave the front motor mount and part of the block off just to fit a t3/t4e
#9
Junior Member
Thread Starter
Join Date: Feb 2003
Location: Grand Cayman, Cayman Islands
Posts: 803
Likes: 0
Received 0 Likes
on
0 Posts
ok, thanks guys, i'm gunna use a different mani then. i dont wanna shave anything, especially the motor mount, if i plan on making big power that would make it easier to break it. thanks agian
daniel
daniel
#10
Junior Member
Thread Starter
Join Date: Feb 2003
Location: Grand Cayman, Cayman Islands
Posts: 803
Likes: 0
Received 0 Likes
on
0 Posts
Re: (RudeLude)
u guys think a t3/t04e with the specs below will support a h22a with good power? what kinda power u all think i could make with this and about when should it spool with a 8.4 cr?
.60 A/R HOUSING
60 TRIM WHEEL
TURBINE SPECS:
.82 A/R HOUSING
STAGE 3 WHEEL
thanks
daniel
.60 A/R HOUSING
60 TRIM WHEEL
TURBINE SPECS:
.82 A/R HOUSING
STAGE 3 WHEEL
thanks
daniel
#12
Junior Member
Thread Starter
Join Date: Feb 2003
Location: Grand Cayman, Cayman Islands
Posts: 803
Likes: 0
Received 0 Likes
on
0 Posts
Re: t3/60-1 vs t3/t04e (RudeLude)
so would that turbo be too large for my motor? what specs should i go for, i wanna run like 375-400 hp.
thanks
daniel
thanks
daniel
Thread
Thread Starter
Forum
Replies
Last Post
TurboJesse
Forced Induction
6
03-24-2003 07:27 PM
JalopySiR
Forced Induction
18
02-07-2003 06:48 PM