T3 60-1 turbo?
 

What is the max HP I could expect from a T3 60-1 with a .63 turbine and .70 compressor trim?

Thanks JOHN

Re: T3 60-1 turbo? (frogscivic)
 

I believe they can support over 500hp. Tell us about the rest of your setup please.

Re: T3 60-1 turbo? (TurboSedan)
 

Most Definatly over 500.... what is your setup

Re: T3 60-1 turbo? (BrokenVtec)
 

I'd say its efficient for 450+whp

Re: T3 60-1 turbo? (BoostedSi)
 

Hey BoostedSi, I totally agreed w/ you on Mahdavi Motorsports. I hear horrible stories from friends that went there and they adviced me never to go there for anything. The owner has a major attitude problem. Hehe.

Re: T3 60-1 turbo? (TurboSedan)
 

Fully built GSR block with 9.1 JE w/ crower rods polished crank. Sleeved by GE and oringed. With Portflow head! All the goodies you can get https://honda-tech.com/forums/images...es/emsmile.gif

BTW, .70 is the compressor housing A/R not the trim. A 60-1 is a 60 trim wheel.

Re: (ecoli)
 

Yea you knows what I meant!!! https://honda-tech.com/forums/images...es/emsmile.gif

Re: (ecoli)
 

a 60 trim and a 60-1 are diferent compressors

a 60 trim compressor flows about 50 lbs/min vs.
a 60-1 flow about 65 lbs/min

http://www.majesticturbo.com/30378.html

http://www.majesticturbo.com/20177.html

A T04E 60-trim and 60-1 are different wheels, but if you do the math on a 60-1, it comes out to being a 60-trim wheel. Trim is just ratio. There is also a little T3 60-trim wheel.