t3/60-1 .63/.70 Peak Power?
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2003
Location: driving a wolf in sheeps skin in, NY
Posts: 9,673
Likes: 0
Received 0 Likes
on
0 Posts
t3/60-1 .63/.70 Peak Power?
Whats the most you guys are spinning these turbos too? The effiency in mine started dropping off past 23psi where it made 508, at 25 it made 527 so we stopped there.
Sound about right? This was on an 84mm GSR motor, stock port head.
Sound about right? This was on an 84mm GSR motor, stock port head.
#2
Honda-Tech Member
Join Date: Nov 2003
Location: Northern, NJ, USA
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Re: t3/60-1 .63/.70 Peak Power? (dunkd)
On a VR6 with a t04 .58 hotside they start to run out of steam at about the same levels (500whp and low 20's boost). You can push em a little more but they really get out of their efficiency. Not a gsr I know but should give you an idea.
#3
i ♥ snails
Join Date: Aug 2004
Location: hmt noggs
Posts: 2,293
Likes: 0
Received 0 Likes
on
0 Posts
that was with a .58 hotside, i think you could push a little more since the t3/60-1 is a tad larger but pretty much reaching peak output and overspinning it out of its efficency range is pretty much worthless.
Thread
Thread Starter
Forum
Replies
Last Post
Azndude1983
Honda Accord (1990 - 2002)
0
02-07-2006 10:26 PM